kevmean wrote:
[Martin.................are you sure the resistances are bad because both the coil on my bike and the spare i have are showing readings twice what it says in the manual if you take the readings from HT outlet to HT outlet and across the two outer terminals on the primary.........if you take readings using the center pin as a common you'll find that all readings will half and be in spec

.........can't see that both my coils have failed identically

....I've fitted my spare one for now but don't hold much hope for it curing the problem though.
Your right kev, tis half. so is the manual is wrong ? it tells you which contacts to test.
got a cam sensor on its way as you did but reading your posts i am not getting my hopes up.
a duff ecm may be another line of enquiry.
Looks like we are in the same boat.
Will be interesting to see who comes up trumps first
Cheers.
I seem to think years ago i tested my coil and went by the manual thinking it was wrong and then somewhere came across contradicting reports that suggested it should be from the centre pin as common.
Hope we both get sorted soon as i have a trip to the czech republic in august and plan on taking the X1 now as i'm not sure an 1125 is up to such a longtrip.