Good evening all,
As the effects of old age are catching up with me, I find I need to have a more upright riding position on my cyclone m2.I figure a set of risers could be the easiest way to go, so I need some advice on how high I can go without having to start changing cables, and altering wiring etc, and where to get some from,
Thanks in advance,
Rod.

I bought higher bars . have risers on other bike

try a pm to cyclonedude who has done it to his stunning M2

_________________
Feros Ferio

This ^^^
I have a suspicion they're export Bonnie bars.

_________________
'98 M2 Razorback, it's a keeper.

How about S3 bars, I'm guessing they're higher?

_________________
Wear the fox hat

https://www.customfighters.com/forums/v ... imgid=2171

I`m guessing , but you`ll need longer cables.....

I don’t need huge bars about 2 inches but I need to know if it can be done without cutting into the electrics, are the s3 bars any higher if so how much, who sells risers for the m2.
Many thanks, Rod.

https://www.facebook.com/groups/1369085 ... SEARCH_BOX

I have raised by one inch no problem with cables - hoses.

Any different bars will have to be long enough throttle side to take brake , switches and throttle grip about 200mm

Possibly these https://www.ebay.co.uk/itm/Renthal-Road ... SwVlVaHmiY

Putting bar risers into the search function, goes back in time. viewtopic.php?f=7&t=129&p=1316&hilit=bar+risers#p1316

I put these on my S1 after much searching and measuring
https://www.classicbikeshop.co.uk/controls-bars-levers/handle-bars/bsa-b44-usa-handlebars.html
They were ideal for me. Stainless, cheap, higher, more pull back, slightly narrower so cables still fitted.

I think that maybe the s3 bars are the way to go, hopefully they will fit without altering to much, now where can I get some?
Regards Rod.

Confirmed. All cables standard.

_________________
'98 M2 Razorback, it's a keeper.