I've mentioned them before, try dropping Simon a mail at BGD http://www.bgdevelopments.co.uk/contact-us.html
They'll probably have no problem knocking up a couple of bespoke ones for you.
They do a lot of stuff for BSB and Moto GP. One of the conmpanies owners is a bike nut. I spoke to him a couple of weeks ago, and he was up to 11 bikes in his shed, and still talking about a Triton he'd been looking to buy!

As an aside, did you manage to bag a set of those X1 forks on e-bay?
Mine should be turning up next week.

Got a new pair of forks off a member on hear few months ago mick, but still looking for left disc or pair but most definitely not wavy!

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Have mailed BG developments waiting for reply cheers Mick.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Good man
I was digging through a box of bits looking for something for Spen, and I came across the rear wavy disc off my TRX track bike. It had cracked just where you'd expect it to

I'm keeping it to show wavy disc lovers

_________________
If your dreams don't scare you, they are not big enough.

Wavey discs look gay ..........................don't care if they work or don't work ...............they look frigging aweful on most bikes.

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

Glad you got some forks
Keep us posted on how you get on with BGD. Do you have a LH calliper then?

I fired an e-mail off to them today actually, as they're still doing some stuff for my Seven, and I dropped some of my boat stuff in to them the other week, as they said they'd get it re-anodised for me, and I mentioned the possibility of them doing a twin disc setup on the buell for me. So I'll be very interested in how you get on.

Here's a picture of the disc bells they made for my Seven.

Any reply from BGD?

No Mick been busy with work but got time now everywhere is shut! Not heard a thing from them though.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Has Mick heard from them yet?

_________________
08 Specialized Langster

It's unusual you didn't get a reply within a couple of days
But as you say, bloody Christmas!

Pash, Mick who? Me? Heard back from them about what?
I'm in contact by e-mail every other week, as we're working on the rear brake setup on my little coffin shaped tin foil kit car.
I only mentioned a twin disc setup on my bike as in maybe in the future, but I didn't press it.
Especialy as I haven't realy ridden the thing yet, and I may feel the current setup is O.K.

Ah right, my misunderstanding, thought you had asked them about a twin disc setup for your X1. Sorry.

Was interested what they charge for discs, competition in the market place is a good thing.

_________________
08 Specialized Langster

No worries.
I couldn't tell you the price of bike stuff, but just for example, the parts for my car,
278mm x 18mm ventilated discs (AP Formula car) where about £125 each
Bells where £85 each, and the bobbin sets where about £40 a set.
All plus Vodka.
I thought the bells where very good value, considering they where bespoke and included the hard anodising.

Cheers,
Mick.

Front L/H disc just arrived from EBC MD734LS, and they still have another still in stock. £160 total.
Still need calipers and front brake + master cylinder with integral reservoir, am looking at ISR but bloody expensive and pretech calipers.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.