Help 12firebolt
I have oil leaking out my clutch cable from the gearbox, if the breather was blocked would this explain the leak or would it be more likely a crank shaft seal, I drained the oil from the gearbox to see if there was any oil leaking from the engine to gearbox, but no the correct amount of oil was drained out. Anybody had any problems like this
Cheers TP

They all do that sir.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Could you try fitting an O ring to the bottom of the cable as it enters the primary - if it doesn't have one already or it is faulty.

Later cables leak around the crimp at the primary fitting to cable outer.
They have an O ring as standard.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Hi the oil is leaking out from the swivel up at the adjuster

Check the breather line.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Thats a happy bit of news for me Maz - I've just fitted a later cable (38613-03C) on my tuber!
Do they leak much?
Nice clutch action now tho' - big improvement over the old one.

No, they just mist......bung some heat shrink over the junction

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR