Just two weeks into ownership of my 55 plate Ulysses.
I normally ride a Evo engined Dyna Glide but wanted something a bit different, do a bit of touring etc....
Had a couple of issues already, one caused by a goosed battery and the other is a faulty neutral switch which I'll change when it arrives. What a place to fit a switch!
Also will eventually have to change the can as it's almost a bag of rust. I bet that's a bit of a nightmare with that valve thingy?

Overall, really pleased with the bike. It's great to ride and Buells have a bit of uniqueness (is that a word?) about them that suits me.

No doubt I'll be back with lots of questions at some point.

Cheers.

welcome !

So, England is a big place, whereabouts are you from ?

Aye Aye, You've hit the right place to 'enhance' your ownership
Make yourself a coffee, relax on the sofa and start using the search box mate, You'll find battery, switch and noise can advice aplenty

Welcome friend

A couple of months in to my 07 XB12X ownership and loving every ride ,

The guy's & gal's on the UKBEG site are friendly bunch, ready to help a new disciple of the mighty religon that is Buell ownership.

Welcome to the site misfit.
Information abounds here, whether you want it or not!
For an exhaust, look no further than an Albert, and you can simply disconnect the valve thingy and just leave it.

_________________
In a purple fug

Hi Misfit
you the same Misfit from HDRCGB ?
most after market cans do away with the valve

DONT BUY A QUILL as they rattle to bits

underslung & mild steel is the dredded tin worms dream
stainless is best

_________________
Feros Ferio

Thanks for the welcome, guys.
Sportster Mann, I'm from Bromsgrove, North Worcestershire.
Nutah, yep one and the same from HDRCGB. Not much Buell activity on the club site so I thought I'd come and hang out where the experts are
Those Remus cans cost a fortune!
I think I might have to wait until next spring

Forget a Remus ... go and see Albert

_________________
"With square conduct, level steps, and upright intentions ..”

Welcome to the Club.

_________________
I started out with nothing and still got most of it left.

I need something that's not too noisy as I'm hoping to ride around France next year. Don't want to attract too much attention...if you know what I mean?

We're not still at war you don't have to sneak around like the SAS

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

Albert hand makes them, just tell him what you want

_________________
"With square conduct, level steps, and upright intentions ..”

Thanks guys....Albert it is then!

Update....
The Albert is complete.
Sounds great, nice low rumble, not too loud and loads better than the stock can.
Looks real cool too!

welcome misfit
ask the questions i'm unlikely to be able to give you the answersbut there are plenty on here that will.