| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| ECM Spy on 2008 bike? https://www.ukbeg.com/forum/viewtopic.php?f=8&t=4385 |
Page 1 of 1 |
| Author: | motoqueiro [ 12 Jan 2010 20:16 ] |
| Post subject: | ECM Spy on 2008 bike? |
Hello me again A few questions about a 2008 buell The EcmSpy does not work, so far, on them does it? His there a way to go around the INTERACTIVE EXHAUST thing? they want to mount a new exhaust on it, what do you recommend? Thanks for your patience |
|
| Author: | pash [ 12 Jan 2010 20:26 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
Try this: viewtopic.php?f=17&t=1375 In the meantime, do you have ECMSpy 1.12.x? Do you know what firmware version you are using in the ECM? |
|
| Author: | motoqueiro [ 12 Jan 2010 20:54 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
Hello pash I have the 1.12.1 EcmSpy I didn't understand this: (Do you know what firmware version you are using in the ECM?) on the bike??? if so no I do not know, its not my bike Does the EcmSpy work on an 2008 bike?, isn't the connector different? |
|
| Author: | pash [ 12 Jan 2010 21:09 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
Nope, it fits and works. All the maps will display incorrectly and it must be used with GREAT CARE... |
|
| Author: | motoqueiro [ 12 Jan 2010 21:19 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
I'm truing to help the guy, just because I'm a good Samaritan  but he is far way from me and don't have a cable for the EcmSpy, and I'm not sure he wants one, I've mail him those drownings in that post, lets see what he doesSo its better not to use the EcmSpy then Ok pash tanks a million |
|
| Author: | pash [ 12 Jan 2010 21:27 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
Just leave the motor connected and disconnect the cable. Simple solution. I took my motor out cos I keep my sandwiches under the airbox cover... 
|
|
| Author: | buddy [ 12 Jan 2010 22:11 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
hi pash just a qick qustion how long do you think it will be before you can use ecm spy on the 09 xb i have it and the cable onley used it on my x1 to re set the tps but thats about as far as i would fell i would go . |
|
| Author: | pash [ 12 Jan 2010 22:22 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
The old version can be used now, but the maps will not be diesplayed correctly cos the software does not know where they are. What do you want to use it for? |
|
| Author: | gunter [ 13 Jan 2010 05:00 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
I have a little utility ready, that will just read and write the data from/to any ECM. In conjunction with TunerPro there's at least one way to adjust values. TunerPro bin definitions are available for download at the ecmspy website. |
|
| Author: | Spook [ 13 Jan 2010 10:24 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
Dis fred is gr8 |
|
| Author: | buddy [ 13 Jan 2010 18:06 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
hi noththink at the mo but just is case the remus poweriza and the new can dont play ball after a good ride. 
|
|
| Author: | pash [ 13 Jan 2010 19:19 ] |
| Post subject: | Re: ECM Spy on 2008 bike? |
Junk the Powerizer... 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|