Does somebody know which connectors are used for the new ECM? Chances are, I might get one for bench tests, so a pinout would be helpfull also.

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett

I have it in the Electrical manual for my 1125. If Kev doesn't beat me to it, I'll dig the info out when I get home from work.

_________________
08 Specialized Langster

Oooooh a challenge
I'll maybe not give you what you want though

ECM J1(11A)(GY) connector
2= clutch switch
4=throttle position sensor
5=barometric pressure sensor
6=Manifold absolute pressure sensor
8=neutral switch
9=coolant temperature input
10=fuel pressure sensor
13=vehicle speed sensor
14=intake air temp sensor
15=serial data receive
16=serial data transmit
17=bank angle sensor
18= crank position sensor+
19=sensor ground #3
20=idle air control motor
21= idle air control motor
22=idle air control motor
23=idle air control motor
24=5V sensor power#1
25=5V sensor power #2
26=crank position sensor -
27= sensor ground #1
28=sensor ground #2
29= CAN low
30= CAN high
31=O2 sensor front
32=O2 sensor rear
34= sidestand sensor

J2 (10A)(BK) connector

2=fan#1 (right)
3= fan #1 (right)
7= starter enable
8= system ground #4
9= ignition switch
10= active intake solenoid
16= system ground #3
17= battery
18=fan #2 (left)
19=auxilliary relay ground
24= sytem ground #2
25= front ignition coil
26= fan #2 (left)
27=fuel pump output
28=fuel pump output
29= front injector output
30= rear injector output
31= rear ignition coil
32=rear ignition coil
33= system ground #1
34= front ignition coil

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

Nice work Kev. Now we need someone with a late XB to fill in the gaps - I would think there is the Adaptive Muffler Control pin out data that is outstanding.

Any description of what the connecter is? Maybe in the parts book?

_________________
08 Specialized Langster

Great, thanks a lot, that's definitely what I wanted to know! All I need now is the connector manufacturer and type.

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett

OK parts book lists them as
connector, 34pin (black) part number Y0219.4a8
connector, 34pin (grey) part number Y0232.4A8
will see if i can find any more info

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

ecm part number for reference is Y0152.1AM

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

Just found this
ECM (black) 34-place Amp (Tyco)
ECM (grey) 34-place Amp (Tyco)

hope this helps .......made buying the manual seem worthwhile now

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.