| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| 1125R ECU to USB comms cable https://www.ukbeg.com/forum/viewtopic.php?f=8&t=3830 |
Page 1 of 1 |
| Author: | Dirty John [ 04 Dec 2009 08:06 ] |
| Post subject: | 1125R ECU to USB comms cable |
Does anyone know where I can get one of these in the UK or has the circuit diagram so I can make my own, I'm thinking of using the com utility from Ohiosportbike. Can anybody recommned any tuning software please thanks Rgds john |
|
| Author: | pash [ 04 Dec 2009 10:04 ] |
| Post subject: | Re: 1125R ECU to USB comms cable |
Maz used to have them. If you want to build one, you will need an FTDI TTL-232R-WE cable http://apple.clickandbuild.com/cnb/shop ... egoryID=47 Datasheet: http://www.ftdichip.com/Documents/DataS ... S_V201.pdf And a 4 pin Deutsch (comprising): 1 x DT06-4S 4 Pin Plug for female contacts 1 x W4S Secondary Lock 4 x Sockets The Buell manual tells you the pin outs (Tx on cable goes to Rx on Buell) |
|
| Author: | pash [ 04 Dec 2009 10:08 ] |
| Post subject: | Re: 1125R ECU to USB comms cable |
As for tuning SW, I think you are restricted to OSB and DirectLink at the moment, however, the SW is only the start of it. It is what you do with it that counts. I am updating the tuning guide with Gunter at the moment, it will be for the earlier EFI, pre-08, however the methods will be the same and I will be tinkering with the 1125 in the near future, so will update it as we learn. |
|
| Author: | gunter [ 04 Dec 2009 11:17 ] |
| Post subject: | Re: 1125R ECU to USB comms cable |
And even pictures available ... http://www.ecmspy.com/steckermontage.shtml |
|
| Author: | Dirty John [ 08 Dec 2009 07:14 ] |
| Post subject: | Re: 1125R ECU to USB comms cable |
thanks lads, it'll give me something to do over xmas. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|