| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| X1 Mainshaft fifth gear bearing https://www.ukbeg.com/forum/viewtopic.php?f=8&t=3721 |
Page 1 of 1 |
| Author: | Martinwill [ 27 Nov 2009 18:47 ] |
| Post subject: | X1 Mainshaft fifth gear bearing |
My mainshaft bearing on my 99 X1 seems to have a little play, i can wobble the drive sprocket slightly by hand (sprocket tight on shaft), and thought i should replace the bearing while i have the crankcase halfs split. Could someone tell me what the bearing number is for this large bearing so hopefully i can get it from a local bearing supplier . Cheers. |
|
| Author: | gunter [ 27 Nov 2009 19:37 ] |
| Post subject: | Re: X1 Mainshaft fifth gear bearing |
Are these identical to XB bearings? I hope that's the right one, I'm looking at. There's a writing "FAG V*T-C 559322 CANADA" on it. |
|
| Author: | Robs [ 27 Nov 2009 22:31 ] |
| Post subject: | Re: X1 Mainshaft fifth gear bearing |
8996A for Harley Part (polymer cage) try Jersey-HD £16 or 6209 steel cage £10 of ebay check the link below viewtopic.php?f=8&t=675&p=6657&hilit=bearing#p6657 Martinwill wrote: My mainshaft bearing on my 99 X1 seems to have a little play, i can wobble the drive sprocket slightly by hand (sprocket tight on shaft), and thought i should replace the bearing while i have the crankcase halfs split.
Could someone tell me what the bearing number is for this large bearing so hopefully i can get it from a local bearing supplier . Cheers. |
|
| Author: | Martinwill [ 28 Nov 2009 08:27 ] |
| Post subject: | Re: X1 Mainshaft fifth gear bearing |
6209rs it is then, Thanks Robs. |
|
| Author: | arge [ 28 Nov 2009 08:39 ] |
| Post subject: | Re: X1 Mainshaft fifth gear bearing |
Arge here Morning Martinwill, are you still playing with the same one or have you got another one. Arge |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|