Photo attempt
| Attachments: |
|
4C59871C-BDC8-444C-8006-4F8CE84AC523.jpeg [ 2.25 MiB | Viewed 2466 times ] |
|
83A6786F-E15F-4AB0-B3E0-C0DC1AFA0661.jpeg [ 1.98 MiB | Viewed 2466 times ] |
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| S1 billet front engine mount https://www.ukbeg.com/forum/viewtopic.php?f=8&t=23711 |
Page 1 of 1 |
| Author: | Greenson [ 10 Mar 2019 11:30 ] |
| Post subject: | S1 billet front engine mount |
I am trying to ascertain if my bike has the revised billet front engine mount or is as yet still fitted with the std mount ? Where should I be looking ? Front it rear , upper or lower ? Pls advise if possible to locate said mount |
|
| Author: | coco [ 10 Mar 2019 13:01 ] |
| Post subject: | Re: S1 billet front engine mount |
At front under the headstock |
|
| Author: | Greenson [ 10 Mar 2019 13:42 ] |
| Post subject: | Re: S1 billet front engine mount |
Thanks for the heads up , now I've found what I need how can I tell if it's standard or upgrade .? Looks like at some point it had the original airbox fitted, but it's on a K&N ram thingy now |
|
| Author: | Greenson [ 10 Mar 2019 13:48 ] | |||
| Post subject: | Re: S1 billet front engine mount | |||
Photo attempt
|
||||
| Author: | Maz [ 10 Mar 2019 13:59 ] |
| Post subject: | Re: S1 billet front engine mount |
That's the OEM and it will snap. |
|
| Author: | Nutah [ 10 Mar 2019 14:09 ] |
| Post subject: | Re: S1 billet front engine mount |
Spondon440 (Andy) on this site makes the billet ones they are a thing of skill & beauty |
|
| Author: | Maz [ 10 Mar 2019 14:32 ] |
| Post subject: | Re: S1 billet front engine mount |
|
|
| Author: | Greenson [ 10 Mar 2019 15:03 ] |
| Post subject: | Re: S1 billet front engine mount |
Appreciate the input I'll get into it |
|
| Author: | gusm2 [ 10 Mar 2019 19:27 ] |
| Post subject: | Re: S1 billet front engine mount |
Nutah wrote: Spondon440 (Andy) on this site makes the billet ones they are a thing of skill & beauty x2
|
|
| Author: | Adam [ 11 Mar 2019 09:07 ] |
| Post subject: | Re: S1 billet front engine mount |
Have the rear isolators been upgraded as well? The early ones were known to fail. |
|
| Author: | Adam [ 11 Mar 2019 09:09 ] |
| Post subject: | Re: S1 billet front engine mount |
A tie wrap around the top of your clutch cable adjuster boot, will stop water getting in and possibly tracking down into your gearbox. I use a smear of silicone as well. |
|
| Author: | Dusty [ 11 Mar 2019 16:24 ] |
| Post subject: | Re: S1 billet front engine mount |
Adam wrote: I use a smear of silicone as well. Yeah...……….but not for that 
|
|
| Author: | Adam [ 11 Mar 2019 18:15 ] |
| Post subject: | Re: S1 billet front engine mount |
|
|
| Author: | barney [ 11 Mar 2019 20:36 ] |
| Post subject: | Re: S1 billet front engine mount |
|
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|