| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| XB9R ECU fuel map advice https://www.ukbeg.com/forum/viewtopic.php?f=8&t=23389 |
Page 1 of 2 |
| Author: | GuzziHero [ 30 Aug 2018 08:36 ] |
| Post subject: | XB9R ECU fuel map advice |
I got my leads for setting the ECU and wondered where I could find some stock maps to try. I will also check the TPS. The bike has the breather mod, and an NAP Sport exhaust fitted. I'd like to get it to run more efficiently, outright speed isn't essential, and to reduce or cure crackling on overrun if possible. Cheers! |
|
| Author: | pash [ 30 Aug 2018 10:48 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
Do you know what firmware it is? BUEGB231? BUECB060? TPS reset process can be found in the How To section. Is there anything specific you want to address with a ‘map’? |
|
| Author: | GuzziHero [ 30 Aug 2018 10:52 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
Well right now it won't pass noise testing for track because of the crackling on overrun. Firmware I dont know. I guess I have to connect to see this. Which is best, can I change it? I'm hoping to improve midrange a little, and eliminate that crackling. I have found the 'race' ECU setting. |
|
| Author: | pash [ 30 Aug 2018 11:23 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
We can get rid of the crackling. The firmware is displayed in ECMSpy, on the EEPROM tab. No you can’t change it. |
|
| Author: | pash [ 30 Aug 2018 11:25 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
You may want to do this, if not done already... viewtopic.php?f=17&t=11 |
|
| Author: | pash [ 30 Aug 2018 11:30 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
I think I covered popping and banging on the over run in the tuning guide... http://www.ecmspy.com/tgv2/guide2.shtml I’ll shut up now and let others chip in... |
|
| Author: | GuzziHero [ 30 Aug 2018 12:55 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
I'm plugged in, did fetch eeprom and it didn't tell me firmware version. Do I need to run the bike? Oh it says invalid com number |
|
| Author: | GuzziHero [ 30 Aug 2018 13:57 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
Sorted it, I needed to select the com number. Firmware is BUEIB310 |
|
| Author: | GuzziHero [ 30 Aug 2018 15:00 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
Wow I just saw the section of reducing popping. That's way too tech for me to handle. I did the cable 8 deactivation and pulled the cable. |
|
| Author: | pash [ 30 Aug 2018 15:22 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
Email me your EEPROM if you want me to do it for you, plus a screenshot of the gauge page when connected. |
|
| Author: | GuzziHero [ 30 Aug 2018 17:19 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
Right, this is what I got. TPS looks OK. Mine is an '04 plate so is it single or double Lambda? Fuel Map. https://imgur.com/7h9n4sG Gauges on cold idle. https://imgur.com/ZaZfjgc |
|
| Author: | pash [ 31 Aug 2018 06:41 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
The first picture was of interesting but very blurred. Did you reset the TPS? |
|
| Author: | GuzziHero [ 31 Aug 2018 09:16 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
I bloody hate IMGUR. I can't get it to expand. I'll use a different host. No TPS reset, it's at 5.5. EDIT: Try this. IMGUR is crap, unless you download their app it seems you cant get the images to expand. http://www.imagebam.com/image/ede83a960762974 |
|
| Author: | pash [ 31 Aug 2018 09:35 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
You really need to do a TPS reset, the numbers don’t tell you anything about the datum (which needs to be correct for smooth running), just the distance from the datum (which needs to be correct for correct tickover speed). |
|
| Author: | GuzziHero [ 31 Aug 2018 09:41 ] |
| Post subject: | Re: XB9R ECU fuel map advice |
Right, cheers. I'll do that but it wont be till thurs next week |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|