FYI, ECMSpy donations have raised almost £55,000 for Emma's Charity
....
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| ECMSpy https://www.ukbeg.com/forum/viewtopic.php?f=8&t=22494 |
Page 1 of 2 |
| Author: | chrisx1 [ 13 Jul 2017 19:01 ] |
| Post subject: | ECMSpy |
Can anyone tell me how much the activation code costs for ECM spy? |
|
| Author: | Nutah [ 13 Jul 2017 21:48 ] |
| Post subject: | Re: ECMSpy |
speak to Pash |
|
| Author: | pash [ 13 Jul 2017 22:32 ] |
| Post subject: | Re: ECMSpy |
It's on the site. You need to register first then follow your nose. It's free to register. However, it's a £37 donation to UKBEG's chosen charity. Everyone is a winner that way. |
|
| Author: | CJ [ 14 Jul 2017 07:19 ] |
| Post subject: | Re: ECMSpy |
FYI, ECMSpy donations have raised almost £55,000 for Emma's Charity ....
|
|
| Author: | chrisx1 [ 14 Jul 2017 20:08 ] |
| Post subject: | Re: ECMSpy |
I eventually found the cost. I don't have a problem with the price or the charity. I used to live very close to Papworth hospital. Unfortunately I can't even get the demo version working. The website isn't created with the thick in mind. I find pc's a pain in the arse at the best of times. And following my nose just makes me fall over. What dim wits like me want is a page preferably clearly labelled that says. Download this Then this And finally this. I have downloaded/uploaded mono I think I have installed the demo. But when I plugged it into the bike it failed to read the connection and asked if I had installed something else.  Can anyone provide me with an idiots guide to doing it. |
|
| Author: | pash [ 14 Jul 2017 23:28 ] |
| Post subject: | Re: ECMSpy |
Are you using a cable or Bluetooth? |
|
| Author: | pash [ 15 Jul 2017 06:36 ] |
| Post subject: | Re: ECMSpy |
Assuming you are using an FTDI cable, install this driver http://www.ftdichip.com/Drivers/CDM/CDM21226_Setup.zip |
|
| Author: | chrisx1 [ 15 Jul 2017 13:59 ] |
| Post subject: | Re: ECMSpy |
I'm using a cable. This is the message I get when I connect to the bike: EEPROM database file not found ECM typeBUEKA please visit www.ecmspy.com to activate. Etc.... When I click close it asks if I want to fetch the zEeprom from an unsupported ECM and save it to the file |
|
| Author: | pash [ 15 Jul 2017 14:13 ] |
| Post subject: | Re: ECMSpy |
So you know it's a BUEKA database you need... |
|
| Author: | chrisx1 [ 15 Jul 2017 14:48 ] |
| Post subject: | Re: ECMSpy |
Why can't I get the demo to work without the database. I have to pay for the software to download the database and I'm not convinced it's going to work, which if I've paid for it I'm going to be pretty p......d |
|
| Author: | pash [ 15 Jul 2017 14:52 ] |
| Post subject: | Re: ECMSpy |
The demo does work. You just told me. |
|
| Author: | chrisx1 [ 15 Jul 2017 14:58 ] |
| Post subject: | Re: ECMSpy |
According to the ECMSpy sight the demo version allows you to read,display and clear error codes etc. I can't do anything, so how is that working? |
|
| Author: | pash [ 15 Jul 2017 15:06 ] |
| Post subject: | Re: ECMSpy |
It connects and it identifies your ECM, I would say that works. I could delete all my databases and see what you can and can't do but at the moment you seem to be shooting the messenger. If I was in your position I would make the donation and get the database, it will work. Just think of the help your donation will be giving. I'm not sure why other people aren't chiming in. |
|
| Author: | chrisx1 [ 15 Jul 2017 15:10 ] |
| Post subject: | Re: ECMSpy |
Sorry Pash, I don't mean to shoot the messenger as you put it but sometimes when someone knows what they are talking about they don't always give the info that the unkowledgeabke need. I will get the database and hope that it works. Cheers |
|
| Author: | pash [ 15 Jul 2017 15:12 ] |
| Post subject: | Re: ECMSpy |
It will work |
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|