No, it is do-able without rotating the engine down.......just need decent tools
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| Intake manifold seals https://www.ukbeg.com/forum/viewtopic.php?f=8&t=20523 |
Page 1 of 1 |
| Author: | D+S [ 15 Jul 2015 12:14 ] |
| Post subject: | Intake manifold seals |
Intake manifold seals on my 06 Ully are letting in air. Brake cleaner squirted in general direction and rise in revs confirmed, air leak. Manual says to disconnect all the bits and remove the throttle body through the top of the bike. I have removed the air box and I am wondering if this is possible. The intake manifold bolts and the manifold to cylinder brace look unaccessable without dropping the engine forward. Is this correct ? |
|
| Author: | Maz [ 15 Jul 2015 12:58 ] |
| Post subject: | Re: Intake manifold seals |
No, it is do-able without rotating the engine down.......just need decent tools
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|