UK Buell Enthusiasts Group
https://www.ukbeg.com/forum/

GEARBOX OIL PRESSURE
https://www.ukbeg.com/forum/viewtopic.php?f=8&t=1818		 Page 1 of 1
Author:  TP [ 27 Jul 2009 13:29 ]
Post subject:  GEARBOX OIL PRESSURE
Help 12firebolt
I have oil leaking out my clutch cable from the gearbox, if the breather was blocked would this explain the leak or would it be more likely a crank shaft seal, I drained the oil from the gearbox to see if there was any oil leaking from the engine to gearbox, but no the correct amount of oil was drained out. Anybody had any problems like this
Cheers TP
Author:  Maz [ 27 Jul 2009 22:03 ]
Post subject:  Re: GEARBOX OIL PRESSURE
They all do that sir.
Author:  paulalig [ 27 Jul 2009 22:34 ]
Post subject:  Re: GEARBOX OIL PRESSURE
:idea: Could you try fitting an O ring to the bottom of the cable as it enters the primary - if it doesn't have one already or it is faulty.
Author:  Maz [ 27 Jul 2009 22:43 ]
Post subject:  Re: GEARBOX OIL PRESSURE
Later cables leak around the crimp at the primary fitting to cable outer.
They have an O ring as standard.
Author:  TP [ 28 Jul 2009 06:32 ]
Post subject:  Re: GEARBOX OIL PRESSURE
Hi the oil is leaking out from the swivel up at the adjuster
Author:  Maz [ 28 Jul 2009 10:34 ]
Post subject:  Re: GEARBOX OIL PRESSURE
Check the breather line.
Author:  paulalig [ 28 Jul 2009 16:34 ]
Post subject:  Re: GEARBOX OIL PRESSURE
:? Thats a happy bit of news for me Maz - I've just fitted a later cable (38613-03C) on my tuber!
Do they leak much?
Nice clutch action now tho' - big improvement over the old one.
Author:  Maz [ 28 Jul 2009 17:14 ]
Post subject:  Re: GEARBOX OIL PRESSURE
No, they just mist......bung some heat shrink over the junction :idea:
Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/