If you mean the cam follower anti rotate screws, then NO
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| Push rod bolts/removal https://www.ukbeg.com/forum/viewtopic.php?f=8&t=13964 |
Page 1 of 1 |
| Author: | Chiz_4 [ 27 Mar 2012 21:24 ] |
| Post subject: | Push rod bolts/removal |
Could anyone tell me if the two bolts at the base of each push rod cover can be removed safely and be replaced with stainless ones,they seem to have a special shape to them and I'm worried about thier purpose.the engine is the 2009 xb12.as you can probably tell I'm not familiar with my way round this engine yet. |
|
| Author: | Maz [ 27 Mar 2012 21:32 ] |
| Post subject: | Re: Push rod bolts/removal |
If you mean the cam follower anti rotate screws, then NO
|
|
| Author: | Chiz_4 [ 27 Mar 2012 21:56 ] |
| Post subject: | Re: Push rod bolts/removal |
I hope I was ok then just unwinding one to have a look but not removing it? |
|
| Author: | Maz [ 27 Mar 2012 22:18 ] |
| Post subject: | Re: Push rod bolts/removal |
Probably 
|
|
| Author: | Chiz_4 [ 27 Mar 2012 22:27 ] |
| Post subject: | Re: Push rod bolts/removal |
Cheers maz!seemed ok when I thrashed it home from work.i think the lesson is don't f--k with what you don't know. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|