after building my own race can i now need the brackets for the chin spoiler the jardine ones will do the trick but need a pattern for them so i can fabricate my own does anyone have the information or some drawings i can use . many thanks jez.

Chuck the spoiler in the bin......they're a pain in the arse, serve no purpose and less is more

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Maz, im getting the impression your a bit of a grumpy old man

Maybe so....but the above is sound advice

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

I have some from a quill can I used to have , if they are any help

if you mananged to make the can the brackets are a piece of piss, i made some a few weeks ago

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

cheers mcrbuelligan can you do me a drawing of them and post it on the site if they are flat bar with upstands and there are three of them they will probably fit if thats not too much trouble that would be cool then i can make some . thanks for the advice maz maybe your right less is more. cheers jez . while im on maz ihave made a race can put on a k &n on it and am thinking about re mapping its the 08 thunderstorm motor withthe oblong oil pump cover , how much would i benifit from it . cheers

If you give me your address on a PM - I will spend you the backets , Ive got a stock exhaust and a modded stock exhaust so Iam fine.