M2 Cyclone running rough at 3000rpm

Playground of the Techies. The place for resolution of more detailed questions and problems. Attempts to start The Tyre Thread or The Oil Thread in here may result in personal injury.
Balamory
Posts: 9
Joined: Sat Feb 27, 2021 8:30 pm
Current ride: M2 Cyclone

M2 Cyclone running rough at 3000rpm

Postby Balamory » Mon Sep 19, 2022 6:04 pm

Bike has been off the road for a bit, cleaned carb and the bike was running great, now it has just started running badly at about 3000 rpm, ok if you rev through it quickly but if you are riding for any time at those revs it feels like a bucking bronco?

Time to strip the carb again? And clean out the tank?

Any thoughts appreciated
Speedvagen
Shand
Jaegher
Sabbath
Campag and Cantis

User avatar
Nutah
Posts: 10570
Joined: Tue May 05, 2009 8:00 pm
Current ride: X1 2001
Location: southampton

Re: M2 Cyclone running rough at 3000rpm

Postby Nutah » Mon Sep 19, 2022 9:18 pm

is the fuel tap gumed up with crud ?
Feros Ferio

Balamory
Posts: 9
Joined: Sat Feb 27, 2021 8:30 pm
Current ride: M2 Cyclone

Re: M2 Cyclone running rough at 3000rpm

Postby Balamory » Tue Sep 20, 2022 8:02 am

will check when I get back ta
Speedvagen
Shand
Jaegher
Sabbath
Campag and Cantis

User avatar
Nutah
Posts: 10570
Joined: Tue May 05, 2009 8:00 pm
Current ride: X1 2001
Location: southampton

Re: M2 Cyclone running rough at 3000rpm

Postby Nutah » Thu Sep 29, 2022 8:35 pm

any luck ?
Feros Ferio

User avatar
barney
Posts: 3849
Joined: Mon Nov 07, 2011 7:10 pm
Current ride: Buell ulysses
Location: Telford

Re: M2 Cyclone running rough at 3000rpm

Postby barney » Fri Sep 30, 2022 7:44 am

:eat:
Buell Ulysses XB12X 06/08


Return to “Technical Forum”

Who is online

Users browsing this forum: Brandwatch [Bot], CommonCrawl [Bot] and 0 guests