| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| ACF 50 problems https://www.ukbeg.com/forum/viewtopic.php?f=7&t=9803 |
Page 1 of 1 |
| Author: | restone [ 02 Feb 2011 22:28 ] |
| Post subject: | ACF 50 problems |
It just wont squirt right   Bought one of those big bottles with a refilable pump squirty doodar, coz I was told the aerosols are unreliable. It just spits it out without atomising it properly into a fine spray. Do you have to warm it up or only use it in the warm. Or am I missing something. |
|
| Author: | Buzz [ 02 Feb 2011 22:30 ] |
| Post subject: | Re: ACF 50 problems |
Take it you've wound the twiddly bit in at the front a bit to take it from a fine jet to a mist? |
|
| Author: | Beef [ 02 Feb 2011 22:32 ] |
| Post subject: | Re: ACF 50 problems |
I think you're missing the atomiser  On a serious note, check the nozzle or go to B&Q and buy a cheap spray bottle from the garden section 
|
|
| Author: | mcrbuelligan [ 02 Feb 2011 22:41 ] |
| Post subject: | Re: ACF 50 problems |
or just pour on a rag and wipe on area ? |
|
| Author: | Beef [ 02 Feb 2011 22:46 ] |
| Post subject: | Re: ACF 50 problems |
....but he wants to f***ing spray it 
|
|
| Author: | MO [ 02 Feb 2011 23:16 ] |
| Post subject: | Re: ACF 50 problems |
Doubt you will get it to atomise at this temperature without heating it up to thin it down.The cans I've had only produce a foam similar to WD-40. |
|
| Author: | losttyke [ 02 Feb 2011 23:56 ] |
| Post subject: | Re: ACF 50 problems |
Yeah you are supposed to warm the can up slightly. Be sensible about it though. |
|
| Author: | restone [ 03 Feb 2011 00:23 ] |
| Post subject: | Re: ACF 50 problems |
leave it on top of the wood burner for an hour then it'll leave a fine spray all over snowdonia 
|
|
| Author: | Mike_S [ 03 Feb 2011 13:30 ] |
| Post subject: | Re: ACF 50 problems |
I always spray it onto a sponge then wipe it on all the surfaces I want to protect, the aerosol cans always spray too much out and it helps to avoid over-spray onto things like brake discs. |
|
| Author: | skipthedog [ 03 Feb 2011 20:31 ] |
| Post subject: | Re: ACF 50 problems |
Fill the pump spray bottle upto the mark; pump it to get pressure, boil the kettle fill a container with the hot water, plonk the spray bottle in, leave it for a minute or so to warm up and it should spray. |
|
| Author: | restone [ 03 Feb 2011 21:43 ] |
| Post subject: | Re: ACF 50 problems |
To chuffin right started reading the can and it started going on about some avionic jibber jabber WTF that was the end of that.
|
|
| Author: | Ash [ 03 Feb 2011 22:35 ] |
| Post subject: | Re: ACF 50 problems |
Was probably written in Dutch 
|
|
| Author: | chris(madrid) [ 03 Feb 2011 23:10 ] |
| Post subject: | Re: ACF 50 problems |
Ash wrote: Was probably written in Dutch twice!
|
|
| Author: | spen [ 03 Feb 2011 23:42 ] |
| Post subject: | Re: ACF 50 problems |
http://www.youtube.com/watch?v=d6IBiR9m3vY |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|