UK Buell Enthusiasts Group
https://www.ukbeg.com/forum/

Any of you lot weld?
https://www.ukbeg.com/forum/viewtopic.php?f=7&t=7363		 Page 1 of 2
Author:  Docca [ 02 Jul 2010 11:41 ]
Post subject:  Any of you lot weld?
The Remus has a nasty crack in it near where it connects to the headers.

HD are probably responsible for this but have just told me to get fucked when I told them I'd like it replaced.

This was expected. It cost me a lot of bananas and with twins on the way I cannot afford to just skip it.

I also won't trust them to take it off/refit to the bike, so am really asking If any on you can weld and wouldn't mind giving me a hand removing/ welding/refitting. Beer tokens and I can travel a bit from base (Surrey)

Thanks
Author:  Ash [ 02 Jul 2010 12:37 ]
Post subject:  Re: Any of you lot weld?
Adam is a welding instructor and Albert makes rather tasty exhausts :)
Author:  markp [ 02 Jul 2010 13:01 ]
Post subject:  Re: Any of you lot weld?
Docca
I had the same, got mine welded at work, The front header stud had been stripped at some stage. I rotated the engine and drilled and tapped a fresh stud in. It has been fine since.

Mark
Author:  Adam [ 02 Jul 2010 14:07 ]
Post subject:  Re: Any of you lot weld?
Ideally, go somewhere that can Tig weld. They won't charge very much. I've had a very poor experience with the welding on a Remus can that I fitted to my 1125. 'Twas fine when I did it properly :D
Author:  Adam [ 02 Jul 2010 14:12 ]
Post subject:  Re: Any of you lot weld?
Ash wrote:
Adam is a welding instructor and Albert makes rather tasty exhausts :)




That's over estimating my abilities a bit Ash. I only teach it one day a week so that I can get out of the office and get my hands dirty lOl ..........and I only teach it to N ot V ery Q ualified Level 2 ;)
Author:  albert666 [ 02 Jul 2010 17:52 ]
Post subject:  Re: Any of you lot weld?
you know what they say adam.
those that can do, those that can't teach ;)
Author:  tubbs [ 02 Jul 2010 18:07 ]
Post subject:  Re: Any of you lot weld?
i will do it free (well some fruit cake with iceing on top) if you get it to me.
Author:  Adam [ 02 Jul 2010 19:36 ]
Post subject:  Re: Any of you lot weld?
albert666 wrote:
you know what they say adam.
those that can do, those that can't teach ;)



They don't call me Birdshit for nothing lOl .

(I did have a Coding qual. years ago though)
Author:  albert666 [ 02 Jul 2010 20:28 ]
Post subject:  Re: Any of you lot weld?
we have a plastic pigeon we hang over the students or stupidents as we like to call them at work when they're trying to weld :)
Author:  Adam [ 02 Jul 2010 20:57 ]
Post subject:  Re: Any of you lot weld?
albert666 wrote:
we have a plastic pigeon we hang over the students or stupidents as we like to call them at work when they're trying to weld :)



My 'students' :roll: get whipped with a thick brazing rod lOl
Author:  albert666 [ 02 Jul 2010 20:58 ]
Post subject:  Re: Any of you lot weld?
acetylene bomb em
Author:  Docca [ 02 Jul 2010 21:02 ]
Post subject:  Re: Any of you lot weld?
tubbs wrote:
i will do it free (well some fruit cake with iceing on top) if you get it to me.



Jesus, that's brilliant.

I'll pm you.
Author:  Nate [ 02 Jul 2010 21:19 ]
Post subject:  Re: Any of you lot weld?
greasemonkey wrote:
albert666 wrote:
acetylene bomb em

heavy duty nitrile glove under the bench :twisted:



I did it with just a plastic bag tied off with a cable tie, scared the shit out of everyone :rofl:

Must put ears on next time :headbang:

N.
Author:  albert666 [ 02 Jul 2010 21:29 ]
Post subject:  Re: Any of you lot weld?
can't beat em
we did one about half the size of a pillow with an electic cable in it, amazing,
and spud cannons too, thats what appretinceships are for ;)
Author:  bueller ball breaker [ 02 Jul 2010 22:14 ]
Post subject:  Re: Any of you lot weld?
I have just had my new metmachex swinger welded :o
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/