Sorry, cant seem to find where you can get the rubber grommet mentioned in the output shaft nipple conversion how-to thread......

any one know where this info is ?

Thanks.
Eric.

_________________
'09 XB12XT
'02 Beta Alp 200
'82 + '83 CX500 euroSports's
'83 CX650 Custom
Green "4 Legged" SUV (now galloping the great plains in the sky !!)

Its behind the plastic pulley cover, remove that and you will see it

_________________
"With square conduct, level steps, and upright intentions ..”

Tech forum Ash

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

I meant where can it be bought.....I thought this info was in a thread previously where the guy who mentioned the use of a rubber grommet to close off the hole left in the belt sprocket cover.......think it was a 13mm grommet...but just wondering where they can be bought !

Thanks,
Eric.

_________________
'09 XB12XT
'02 Beta Alp 200
'82 + '83 CX500 euroSports's
'83 CX650 Custom
Green "4 Legged" SUV (now galloping the great plains in the sky !!)