UK Buell Enthusiasts Group
https://www.ukbeg.com/forum/

Nearly there
https://www.ukbeg.com/forum/viewtopic.php?f=7&t=24566		 Page 1 of 1
Author:  ogri211 [ 13 Aug 2020 17:24 ]
Post subject:  Nearly there
I got a bit of a telling off on this forum for buying a nearly standard 96 S1 , but Ive been busy and listened to certain Gurus on this forum, the list so far, seat reworked as it was like a suppository, Genuine Mikuni carb, X1 swing arm, EBC Pro Lite disc, X1 isolators, upgraded primary chain tensioner, lucky hands oil pump drive gear, XB12 heads, 2 1/2" race headers, with upgraded dogbone mount, Billet front mount, and finally one of the Race pro pipes obtained through this forum, I also lined the tank with Caswell., the jurys still out on changing my shock as I have heard mixed reports. The bike now goes, stops and sounds good , thanks for all the help and advice from this forum.

Attachments:
IMG_3168.JPG
IMG_3168.JPG [ 2.09 MiB | Viewed 2762 times ]
IMG_3167.JPG
IMG_3167.JPG [ 1.64 MiB | Viewed 2762 times ]
Author:  TOPGUMM [ 13 Aug 2020 17:40 ]
Post subject:  Re: Nearly there
Be interesting to see how long the caswell lasts :P

Used it in two metal bike tanks and used flowliner in Landrover tank.
Author:  x1glider [ 13 Aug 2020 19:19 ]
Post subject:  Re: Nearly there
A finely done machine. :yup:
Author:  gusm2 [ 13 Aug 2020 19:26 ]
Post subject:  Re: Nearly there
Very nice 👍 8-)
Author:  TOPGUMM [ 13 Aug 2020 20:18 ]
Post subject:  Re: Nearly there
Maz nipple and decent foot rests , cool bike.
Author:  Finmows [ 14 Aug 2020 12:41 ]
Post subject:  Re: Nearly there
ogri211 wrote:
the jurys still out on changing my shock as I have heard mixed reports.

I'd get it changed...it's a "recall" shock anyway ;)
Author:  Nutah [ 14 Aug 2020 18:59 ]
Post subject:  Re: Nearly there
8-)
Author:  conquistador [ 14 Aug 2020 20:38 ]
Post subject:  Re: Nearly there
Looking good.
Author:  gusm2 [ 15 Aug 2020 07:13 ]
Post subject:  Re: Nearly there
Finmows wrote:
ogri211 wrote:
the jurys still out on changing my shock as I have heard mixed reports.

I'd get it changed...it's a "recall" shock anyway ;)


I'm pretty sure mine has never been replaced, is it still possible that HD would honour the recalls, not that I plan on fitting it on any time soon but it might be good to have :?:
Author:  Adam [ 15 Aug 2020 09:50 ]
Post subject:  Re: Nearly there
What mixed reports on the shock have heard? Some snap at the neck and some don't? lOl It should've be sorted under a recall.
Author:  Finmows [ 15 Aug 2020 10:56 ]
Post subject:  Re: Nearly there
gusm2 wrote:
Finmows wrote:
ogri211 wrote:
the jurys still out on changing my shock as I have heard mixed reports.

I'd get it changed...it's a "recall" shock anyway ;)


I'm pretty sure mine has never been replaced, is it still possible that HD would honour the recalls, not that I plan on fitting it on any time soon but it might be good to have :?:

I'm not too sure they would honour the recall, mine was done 15 years ago and took LOTS of enquiries led by Alan (1203) who worked for Buell HD
Author:  Maz [ 15 Aug 2020 10:58 ]
Post subject:  Re: Nearly there
Think he means the ongoing debate over the merits of an AST ?
Author:  Bonzo [ 15 Aug 2020 14:32 ]
Post subject:  Re: Nearly there
Finmows wrote:
I'm not too sure they would honour the recall, mine was done 15 years ago and took LOTS of enquiries led by Alan (1203) who worked for Buell HD


Same here, thanks 1203 :)
Author:  cactus [ 26 Aug 2020 21:39 ]
Post subject:  Re: Nearly there
Nice looking machine. :yup:
Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/