UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
First poking and prodding session https://www.ukbeg.com/forum/viewtopic.php?f=7&t=24417 |
Page 1 of 1 |
Author: | Tick [ 31 May 2020 15:27 ] |
Post subject: | First poking and prodding session |
Did some minor dismantling today just to have a look around (I can’t help it!). Glad I did as I found that the mesh on the inside of the air filter is rusty and also found this blanking plug on the throttle body was perished and split, almost certainly would have been causing a minor air leak. Luckily I had some left over bits that come with a set of Diesel injector leak-off pipes. One fitted just dandy. Need to put a wee shopping list together as I want to buy a service kit, a panel screw that I discovered to be missing and also a sprung belt tensioner. Are there any specialist parts shops associated with the forum? https://flic.kr/p/2j7oiVp https://flic.kr/p/2j7oovm P.S. Can anyone advise me about posting pics hosted by Flickr? I get a forum message in red saying ‘It was not possible to determine the dimensions of the image. Please verify that the URL you entered is correct But, if I copy the URL for the picture as above, the forum accepts it no problem? |
Author: | Dusty [ 31 May 2020 16:55 ] |
Post subject: | Re: First poking and prodding session |
Can you please think carefully before giving your posts such a suggestive title. The older members on here (particularly in lockdown) can get the vapours in anticipation. ![]() |
Author: | jeznewsome [ 31 May 2020 19:15 ] |
Post subject: | Re: First poking and prodding session |
Quote: https://flic.kr/p/2j7oiVp https://flic.kr/p/2j7oovm P.S. Can anyone advise me about posting pics hosted by Flickr? If you use the 'Share' Arrow, after seleting your image (in bottom RHS of the screen) and select BBCode and 'medium' you'll get a link that you can cut and paste directly into the forum editor, which will work with the forum hosting software. ![]() It'll show your image like this: ![]() |
Author: | Tick [ 31 May 2020 21:54 ] |
Post subject: | Re: First poking and prodding session |
![]() |
Author: | Tick [ 31 May 2020 21:57 ] |
Post subject: | Re: First poking and prodding session |
Dusty wrote: Can you please think carefully before giving your posts such a suggestive title. The older members on here (particularly in lockdown) can get the vapours in anticipation. ![]() 😂Appreciate the advice Dusty. From now on I’ll put PG, 14 or 18 ratings at the end of my titles. 😜 |
Author: | Nutah [ 31 May 2020 22:02 ] |
Post subject: | Re: First poking and prodding session |
![]() ![]() ![]() |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |