UK Buell Enthusiasts Group
https://www.ukbeg.com/forum/

Length of rear brake line.
https://www.ukbeg.com/forum/viewtopic.php?f=7&t=24361
Page 1 of 1

Author:  ogri211 [ 03 May 2020 18:51 ]
Post subject:  Length of rear brake line.

I ordered a braided line for an X1 as I fitted an X1 swing arm to my S1, the hose I was sent was 835mm between centres with a 90 degree and a 45 degree banjo, this pipe is way too long and apart from the 90 degree end it looks as if its about the length of the front one , can anyone give me the correct length and the correct ends that I should use for this set up, I have already bought a M10x 1 banjo bolt with a switch in it.

Author:  Maz [ 03 May 2020 19:42 ]
Post subject:  Re: Length of rear brake line.

ogri211 wrote:
I ordered a braided line for an X1 as I fitted an X1 swing arm to my S1, the hose I was sent was 835mm between centres with a 90 degree and a 45 degree banjo, this pipe is way too long and apart from the 90 degree end it looks as if its about the length of the front one , can anyone give me the correct length and the correct ends that I should use for this set up, I have already bought a M10x 1 banjo bolt with a switch in it.



525 and 2x 45 banjos.

Author:  ogri211 [ 03 May 2020 21:36 ]
Post subject:  Re: Length of rear brake line.

Thanks. :D :D

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/