UK Buell Enthusiasts Group
https://www.ukbeg.com/forum/

WHEEL BALANCING
https://www.ukbeg.com/forum/viewtopic.php?f=7&t=24306		 Page 1 of 2
Author:  WILLYBUELL [ 21 Mar 2020 15:49 ]
Post subject:  WHEEL BALANCING
Done some wheel balancing :yup: :rotfl: :ner:

Attachments:
WB 3.jpg
WB 3.jpg [ 204.75 KiB | Viewed 2189 times ]
WB 2.jpg
WB 2.jpg [ 524.72 KiB | Viewed 2189 times ]
WB 1.jpg
WB 1.jpg [ 259.13 KiB | Viewed 2189 times ]
Author:  Nutah [ 21 Mar 2020 17:06 ]
Post subject:  Re: WHEEL BALANCING
I hope you wore a mask
& sprayed everything with agent orange just to be on the safe side :hehe:
Author:  TOPGUMM [ 21 Mar 2020 18:18 ]
Post subject:  Re: WHEEL BALANCING
Don`t forget to put a long screw right through them to stop them coming off :yup:
Author:  Nutah [ 21 Mar 2020 19:30 ]
Post subject:  Re: WHEEL BALANCING
:rotfl:
Author:  WILLYBUELL [ 21 Mar 2020 20:36 ]
Post subject:  Re: WHEEL BALANCING
TOPGUMM wrote:
Don`t forget to put a long screw right through them to stop them coming off :yup:

:yup: Cheers gummy will do that tomoz ready for going to work on her monday xx
Author:  WILLYBUELL [ 21 Mar 2020 20:36 ]
Post subject:  Re: WHEEL BALANCING
Nutah wrote:
:rotfl:

:rotfl: :rotfl:
Author:  Adam [ 22 Mar 2020 11:43 ]
Post subject:  Re: WHEEL BALANCING
:rotfl:
Author:  barney [ 22 Mar 2020 11:51 ]
Post subject:  Re: WHEEL BALANCING
TOPGUMM wrote:
Don`t forget to put a long screw right through them to stop them coming off :yup:

you may well jest but i have see that done .
small screw through rim into tyre bead to stop it creeping under braking loads,and deflating :old:
Author:  Adam [ 22 Mar 2020 15:57 ]
Post subject:  Re: WHEEL BALANCING
Very common on Trials bikes using tubes and 3psi pressure. Stops the valve getting ripped out and much cheaper than rim locks, which can be a bit naughty when you've got one tyre lever and very muddy hands lOl (...and a huge bunch of mates taking the piss lOl )
Author:  Nutah [ 22 Mar 2020 16:06 ]
Post subject:  Re: WHEEL BALANCING
:rotfl: :rotfl:
thats what mates are for
Author:  Finmows [ 22 Mar 2020 16:31 ]
Post subject:  Re: WHEEL BALANCING
I remember NCK using "self tappers" through the rear rim and into the tyre on their racing H2 back in the late '70's
Author:  barney [ 22 Mar 2020 16:45 ]
Post subject:  Re: WHEEL BALANCING
https://youtu.be/S7X7QNQ8lNU :old:
Author:  Nutah [ 22 Mar 2020 16:49 ]
Post subject:  Re: WHEEL BALANCING
:mrgreen: :mrgreen:
Author:  WILLYBUELL [ 22 Mar 2020 18:07 ]
Post subject:  Re: WHEEL BALANCING
:yup: :yup:
barney wrote:
https://youtu.be/S7X7QNQ8lNU :old:
Author:  WILLYBUELL [ 22 Mar 2020 18:08 ]
Post subject:  Re: WHEEL BALANCING
Nutah wrote:
:rotfl: :rotfl:
thats what mates are for

:yup: :rotfl: :rotfl:
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/