| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| Replacement key. https://www.ukbeg.com/forum/viewtopic.php?f=7&t=24102 |
Page 1 of 2 |
| Author: | ogri211 [ 23 Oct 2019 09:51 ] |
| Post subject: | Replacement key. |
When i got my S1 the previous owner had fitted a pattern ignition keyswitch, He has sent the original which he never got a key with, is it possible to get a replacement key from anywhere ,maybe using the VIN number? |
|
| Author: | TOPGUMM [ 23 Oct 2019 15:04 ] |
| Post subject: | Re: Replacement key. |
Is there a problem with the switch on it now. |
|
| Author: | TOPGUMM [ 23 Oct 2019 15:09 ] |
| Post subject: | Re: Replacement key. |
Tried something similar with Harley when Buell were with them and took ages to finally be told "oh sorry can`t do that . Wasted months . |
|
| Author: | DaveH [ 23 Oct 2019 20:11 ] |
| Post subject: | Re: Replacement key. |
There is a place near Maz's called keyfax. If they are given a barrel they can cut a key to it. Not sure how long it takes or how much this is or if paperwork of proof of ownership is required. Surely there must be somewhere nearer the border that does this sort of thing. |
|
| Author: | Maz [ 23 Oct 2019 20:13 ] |
| Post subject: | Re: Replacement key. |
|
|
|
| Author: | TOPGUMM [ 23 Oct 2019 22:36 ] |
| Post subject: | Re: Replacement key. |
If you have a key lockable fuelcap it is not linked to the ignition being the same . |
|
| Author: | Maz [ 23 Oct 2019 23:13 ] |
| Post subject: | Re: Replacement key. |
There's no such thing as a lockable fuel cap, any rotary pin key will undo it. |
|
| Author: | TOPGUMM [ 24 Oct 2019 09:41 ] |
| Post subject: | Re: Replacement key. |
That`s what I tried to say 
|
|
| Author: | ogri211 [ 26 Oct 2019 09:34 ] |
| Post subject: | Re: Replacement key. |
Sorry about the delay to answer i may try and get a locksmith to make me a key, the barrel that is on it is OK but sometimes it rotates with the key even though I have tightened it. |
|
| Author: | TOPGUMM [ 26 Oct 2019 12:20 ] | ||
| Post subject: | Re: Replacement key. | ||
ogri211 wrote: Sorry about the delay to answer i may try and get a locksmith to make me a key, the barrel that is on it is OK but sometimes it rotates with the key even though I have tightened it. The ignition should have two straight sides to locate it in the bracket to stop it spinning. Here is a photo of an S1 bracket I copied which takes the ignition and choke. I welded a stud on it for fixing as some have a bolt which clashes with the wire at the back of the ignition. The smaller bracket is for an X1 choke as ignition is on the dash.
|
|||
| Author: | Nutah [ 26 Oct 2019 13:06 ] |
| Post subject: | Re: Replacement key. |
X1 choke 
|
|
| Author: | TOPGUMM [ 26 Oct 2019 13:11 ] |
| Post subject: | Re: Replacement key. |
Nutah wrote: X1 choke May not be then as it`s Fi. Same position same shape as S1.Seat release? |
|
| Author: | Nutah [ 26 Oct 2019 14:16 ] |
| Post subject: | Re: Replacement key. |
 no guess again 
|
|
| Author: | TOPGUMM [ 26 Oct 2019 19:50 ] |
| Post subject: | Re: Replacement key. |
Bottle opener? |
|
| Author: | Nutah [ 26 Oct 2019 21:43 ] |
| Post subject: | Re: Replacement key. |
rod rest it could be the choke bracket , for an S1 with a relocated ignition switch
|
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|