try a pm to cyclonedude who has done it to his stunning M2
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| Risers https://www.ukbeg.com/forum/viewtopic.php?f=7&t=24093 |
Page 1 of 1 |
| Author: | Rod [ 15 Oct 2019 21:35 ] |
| Post subject: | Risers |
Good evening all, As the effects of old age are catching up with me, I find I need to have a more upright riding position on my cyclone m2.I figure a set of risers could be the easiest way to go, so I need some advice on how high I can go without having to start changing cables, and altering wiring etc, and where to get some from, Thanks in advance, Rod. |
|
| Author: | TOPGUMM [ 15 Oct 2019 22:04 ] |
| Post subject: | Re: Risers |
I bought higher bars . have risers on other bike |
|
| Author: | Nutah [ 15 Oct 2019 22:09 ] |
| Post subject: | Re: Risers |
try a pm to cyclonedude who has done it to his stunning M2
|
|
| Author: | rik [ 16 Oct 2019 00:19 ] |
| Post subject: | Re: Risers |
Nutah wrote: try a pm to cyclonedude who has done it to his stunning M2 This ^^^ I have a suspicion they're export Bonnie bars. |
|
| Author: | Bonzo [ 16 Oct 2019 10:22 ] |
| Post subject: | Re: Risers |
How about S3 bars, I'm guessing they're higher? |
|
| Author: | TOPGUMM [ 16 Oct 2019 12:54 ] |
| Post subject: | Re: Risers |
https://www.customfighters.com/forums/v ... imgid=2171 I`m guessing , but you`ll need longer cables..... |
|
| Author: | Rod [ 17 Oct 2019 23:03 ] |
| Post subject: | Re: Risers |
I don’t need huge bars about 2 inches but I need to know if it can be done without cutting into the electrics, are the s3 bars any higher if so how much, who sells risers for the m2. Many thanks, Rod. |
|
| Author: | TOPGUMM [ 17 Oct 2019 23:44 ] |
| Post subject: | Re: Risers |
https://www.facebook.com/groups/1369085 ... SEARCH_BOX I have raised by one inch no problem with cables - hoses. Any different bars will have to be long enough throttle side to take brake , switches and throttle grip about 200mm Possibly these https://www.ebay.co.uk/itm/Renthal-Road ... SwVlVaHmiY |
|
| Author: | TOPGUMM [ 17 Oct 2019 23:48 ] |
| Post subject: | Re: Risers |
Putting bar risers into the search function, goes back in time. viewtopic.php?f=7&t=129&p=1316&hilit=bar+risers#p1316 |
|
| Author: | griff [ 18 Oct 2019 07:59 ] |
| Post subject: | Re: Risers |
I put these on my S1 after much searching and measuring https://www.classicbikeshop.co.uk/controls-bars-levers/handle-bars/bsa-b44-usa-handlebars.html They were ideal for me. Stainless, cheap, higher, more pull back, slightly narrower so cables still fitted. |
|
| Author: | Rod [ 21 Oct 2019 16:00 ] |
| Post subject: | Re: Risers |
I think that maybe the s3 bars are the way to go, hopefully they will fit without altering to much, now where can I get some? Regards Rod. |
|
| Author: | rik [ 21 Oct 2019 17:50 ] |
| Post subject: | Re: Risers |
rik wrote: Nutah wrote: try a pm to cyclonedude who has done it to his stunning M2 This ^^^ I have a suspicion they're export Bonnie bars. Confirmed. All cables standard. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|