| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| Fly screen fixing well nut https://www.ukbeg.com/forum/viewtopic.php?f=7&t=24065 |
Page 1 of 1 |
| Author: | Nutah [ 22 Sep 2019 21:51 ] |
| Post subject: | Fly screen fixing well nut |
X1 screen fixing well nuts anyone know where to get them from ? |
|
| Author: | TOPGUMM [ 22 Sep 2019 22:09 ] |
| Post subject: | Re: Fly screen fixing well nut |
I have some in the garage with dimensions on packet, can have a look tomorrow if no one else knows . |
|
| Author: | Nutah [ 22 Sep 2019 22:14 ] |
| Post subject: | Re: Fly screen fixing well nut |
cheers
|
|
| Author: | TOPGUMM [ 22 Sep 2019 22:30 ] |
| Post subject: | Re: Fly screen fixing well nut |
Went and had a butchers . https://memfast.co.uk/shop/Vprod2.asp?cat=2256003409 Code JF-4100 I use stainless bolts and nylon washers too. Whether you buy them here or not , you can get dims from link |
|
| Author: | TOPGUMM [ 22 Sep 2019 22:33 ] |
| Post subject: | Re: Fly screen fixing well nut |
Bought 30 and have 14 left if you get stuck . |
|
| Author: | TOPGUMM [ 22 Sep 2019 22:46 ] |
| Post subject: | Re: Fly screen fixing well nut |
10 pieces with bolts and washers for £8 https://www.ebay.co.uk/itm/Genuine-RAWL ... nRI9qWX6Ew |
|
| Author: | Nutah [ 23 Sep 2019 11:15 ] |
| Post subject: | Re: Fly screen fixing well nut |
thanks for all your help Topgumm cheers for the offer i only need one , but have ordered some so i will have some spares for when i loose the next one i thought they were imperial size ? maybe that's why i couldn't find any
|
|
| Author: | TOPGUMM [ 23 Sep 2019 13:23 ] |
| Post subject: | Re: Fly screen fixing well nut |
They spin and feck up when getting off . Copper slip `em up. I`m hoping the x1 is the same as the s1`s |
|
| Author: | Nutah [ 23 Sep 2019 15:57 ] |
| Post subject: | Re: Fly screen fixing well nut |
|
|
| Author: | XB4RT [ 27 Sep 2019 18:02 ] |
| Post subject: | Re: Fly screen fixing well nut |
I bought a bucket load but changed to 5mm, has got what’s left if I remember |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|