How feckin difficult can it be to find one so that I can have it plated?
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| Sidestand spring https://www.ukbeg.com/forum/viewtopic.php?f=7&t=23785 |
Page 1 of 1 |
| Author: | Chiz_4 [ 17 Apr 2019 19:43 ] |
| Post subject: | Sidestand spring |
How feckin difficult can it be to find one so that I can have it plated?
|
|
| Author: | Finmows [ 17 Apr 2019 20:00 ] |
| Post subject: | Re: Sidestand spring |
Why? Surely the coating would be comprised with the stretch of the spring |
|
| Author: | Chiz_4 [ 18 Apr 2019 14:37 ] |
| Post subject: | Re: Sidestand spring |
If you use a show chrome it does believe it or not has some stretch to it,the main issue is getting it on without damaging it. |
|
| Author: | CHURCHILL [ 18 Apr 2019 16:07 ] |
| Post subject: | Re: Sidestand spring |
Buell Bling 
|
|
| Author: | Finmows [ 22 Apr 2019 18:55 ] |
| Post subject: | Re: Sidestand spring |
https://www.ebay.co.uk/itm/Chrome-Kicks ... 5d67a6d377 |
|
| Author: | Jazzbutcher [ 23 Apr 2019 08:54 ] |
| Post subject: | Re: Sidestand spring |
As always it would be stainless for me. No hassle with plating & will never rust. https://www.ebay.co.uk/itm/BSA-A75-TRIU ... Sw~CRTrKCj |
|
| Author: | Finmows [ 23 Apr 2019 10:00 ] |
| Post subject: | Re: Sidestand spring |
Jazzbutcher wrote: No hassle with plating & will never rust. Probably won't fit either!  
|
|
| Author: | Jazzbutcher [ 23 Apr 2019 10:45 ] |
| Post subject: | Re: Sidestand spring |
Finmows wrote: Jazzbutcher wrote: No hassle with plating & will never rust. Probably won't fit either! Nothing a set of pliers wouldn't sort 
|
|
| Author: | Nutah [ 23 Apr 2019 11:25 ] |
| Post subject: | Re: Sidestand spring |
Jazzbutcher wrote: Finmows wrote: Jazzbutcher wrote: No hassle with plating & will never rust. Probably won't fit either! Nothing a set of pliers wouldn't sort please don't use pliers, we had a contractor loose an eye doing that recently . use the correct tool 
|
|
| Author: | Jazzbutcher [ 23 Apr 2019 14:46 ] |
| Post subject: | Re: Sidestand spring |
Nutah wrote: Jazzbutcher wrote: Finmows wrote: Jazzbutcher wrote: No hassle with plating & will never rust. Probably won't fit either! Nothing a set of pliers wouldn't sort please don't use pliers, we had a contractor loose an eye doing that recently . use the correct tool  Great advice, I was being flippant to be honest. |
|
| Author: | Finmows [ 23 Apr 2019 19:20 ] |
| Post subject: | Re: Sidestand spring |
I'm sure the spring would find a tool to fit it |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|