| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| 1125r rear wheel spindle. https://www.ukbeg.com/forum/viewtopic.php?f=7&t=23671 |
Page 1 of 1 |
| Author: | Jazzbutcher [ 18 Feb 2019 10:27 ] |
| Post subject: | 1125r rear wheel spindle. |
Hi Folks, I seem to have done all the correct procedures but cannot loosen & remove the rear wheel spindle. 10mm Lock nut is out, wd 40'd the end threads on the right side. Trying with a ratchet & foot long torque bar with wheel spindle removal tool but near on full body weight & nothing shifting. Tried shocking it loose with a lump hammer on the torque bar. I know it's left hand thread. Anyone got any ideas please. All the best Paul. |
|
| Author: | Jazzbutcher [ 18 Feb 2019 12:46 ] |
| Post subject: | Re: 1125r rear wheel spindle. |
Hi again, Don't worry I've done it. Heated a long socket with a blowtorch in the spindle, heat transference worked a treat. |
|
| Author: | Ohsteveo [ 18 Feb 2019 21:48 ] |
| Post subject: | Re: 1125r rear wheel spindle. |
Jazzbutcher wrote: Hi again, Don't worry I've done it. Heated a long socket with a blowtorch in the spindle, heat transference worked a treat. Pictures or it didn't happen 
|
|
| Author: | Jazzbutcher [ 18 Feb 2019 23:26 ] | ||
| Post subject: | Re: 1125r rear wheel spindle. | ||
Yeah Right. Here's the wheel off & me breaking the bead with my ABBA bead breaker. Not a stuck spindle to be seen.
|
|||
| Author: | Jazzbutcher [ 19 Feb 2019 11:05 ] | ||
| Post subject: | Re: 1125r rear wheel spindle. | ||
Ohsteveo wrote: Jazzbutcher wrote: Hi again, Don't worry I've done it. Heated a long socket with a blowtorch in the spindle, heat transference worked a treat. Pictures or it didn't happen And belt evidence provided. When are you doing your's Steve heh heh.
|
|||
| Author: | Kiwi [ 21 Feb 2019 22:12 ] |
| Post subject: | Re: 1125r rear wheel spindle. |
 Nice one!
|
|
| Author: | Ohsteveo [ 21 Feb 2019 23:34 ] |
| Post subject: | Re: 1125r rear wheel spindle. |
 good work.......you put me to shame.... 
|
|
| Author: | Finmows [ 22 Feb 2019 09:35 ] |
| Post subject: | Re: 1125r rear wheel spindle. |
That kitchen is in a disgusting state!  
|
|
| Author: | Jazzbutcher [ 22 Feb 2019 13:12 ] |
| Post subject: | Re: 1125r rear wheel spindle. |
Kiwi wrote: :yup: Nice one! Thanks Kiwi. |
|
| Author: | Jazzbutcher [ 22 Feb 2019 13:13 ] |
| Post subject: | Re: 1125r rear wheel spindle. |
Ohsteveo wrote: :sun: good work.......you put me to shame.... That isn't my intention Steve, just happy to have mine done. |
|
| Author: | TOPGUMM [ 22 Feb 2019 16:40 ] |
| Post subject: | Re: 1125r rear wheel spindle. |
 Finmows wrote: That kitchen is in a disgusting state!
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|