pash wrote:
I use a Micron one on X1/S1/XB, less than £20 on eBay
i use the same on my X1 , front & rear Micron was cheaper on Ebay from M&P shop
than it was from there own site
so shop around 
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| Paddock stand https://www.ukbeg.com/forum/viewtopic.php?f=7&t=21045 |
Page 1 of 1 |
| Author: | Bunnyman [ 30 Dec 2015 23:46 ] |
| Post subject: | Paddock stand |
Hi any recommendations for easy fit rear paddock stand for my 2002 cyclone please?? |
|
| Author: | gusm2 [ 31 Dec 2015 10:06 ] |
| Post subject: | Re: Paddock stand |
All depends on your budget really, tbh I use a standard rear and depending if the wheel needs to come off or not I reverse the lifting cup thingys and push the bar end through the hollow spindle...simples, |
|
| Author: | pash [ 31 Dec 2015 10:35 ] |
| Post subject: | Re: Paddock stand |
I use a Micron one on X1/S1/XB, less than £20 on eBay |
|
| Author: | Nutah [ 31 Dec 2015 15:19 ] |
| Post subject: | Re: Paddock stand |
pash wrote: I use a Micron one on X1/S1/XB, less than £20 on eBay i use the same on my X1 , front & rear Micron was cheaper on Ebay from M&P shop than it was from there own site so shop around
|
|
| Author: | gusm2 [ 31 Dec 2015 15:45 ] |
| Post subject: | Re: Paddock stand |
Yep them's the one 
|
|
| Author: | Adam [ 31 Dec 2015 20:04 ] |
| Post subject: | Re: Paddock stand |
Micron for me too. If you've got a long slim extension bar, you can unbolt the cups like Gus, and slide it all the way through the spindle. It's bomb proof  (if you're not taking the wheel out  )
|
|
| Author: | kevmean [ 01 Jan 2016 13:33 ] |
| Post subject: | Re: Paddock stand |
Standard paddock stand the same as all the others OR the Abba stand that mounts in the swingarm pivot position, these are excellent stands. |
|
| Author: | lotusjez [ 01 Jan 2016 18:37 ] |
| Post subject: | Re: Paddock stand |
Warrior Front And Rear Motorcycle / Bike Paddock Stand / Stands Combo / Pair ( 361087437698 ) Ebay. Santa brought these stands for my 2001 Cyclone. Already used them to change the rear tyre. Didn't need the front one, but it's nice to use it! No prob and easy to use. Recommended. Jez |
|
| Author: | ju [ 09 Jan 2016 23:13 ] |
| Post subject: | Re: Paddock stand |
Yup, used many different types and always found the Micron to be one of the best |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|