Great thanks for that .. hopefully someone's got stock
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| 1125 cr brake pads https://www.ukbeg.com/forum/viewtopic.php?f=7&t=17589 |
Page 1 of 2 |
| Author: | danm01 [ 23 Aug 2013 07:10 ] |
| Post subject: | 1125 cr brake pads |
Does anyone know where I can buy a set of rear brake pads in the UK? I have tried eBay but no one has any stock. |
|
| Author: | pash [ 23 Aug 2013 07:36 ] |
| Post subject: | Re: 1125 cr brake pads |
Why not fit a Brembo then you will never have problems buying pads again... viewtopic.php?p=189975#p189975 I may even have one lurking in the garage that you can have for £30. |
|
| Author: | danm01 [ 23 Aug 2013 08:12 ] |
| Post subject: | Re: 1125 cr brake pads |
Great thanks for that .. hopefully someone's got stock
|
|
| Author: | pash [ 23 Aug 2013 08:19 ] |
| Post subject: | Re: 1125 cr brake pads |
If you still want the 1125 pads, try www.brakes4u.co.uk. |
|
| Author: | pash [ 23 Aug 2013 08:28 ] |
| Post subject: | Re: 1125 cr brake pads |
I just did a search on eBay for 'buell 1125r rear brake pads' and I counted 4 sellers in the UK. |
|
| Author: | danm01 [ 23 Aug 2013 10:04 ] |
| Post subject: | Re: 1125 cr brake pads |
Have ordered two sets from eBay now both times out of stock.. i will try the other site you mentioned.. thanks |
|
| Author: | pash [ 23 Aug 2013 10:23 ] |
| Post subject: | Re: 1125 cr brake pads |
I would fit a Brembo. These pads are Buell only and with the number of 1125s on the roads, the interest in supplying and even manufacturing them will dwindle. The Brembo uses an easily available pad and is fitted to many Italian models... Time to think about long term survival... |
|
| Author: | sportster_mann [ 23 Aug 2013 10:27 ] |
| Post subject: | Re: 1125 cr brake pads |
 Especially as the stock one is not rebuildable and is known to seize. |
|
| Author: | Maz [ 23 Aug 2013 10:54 ] |
| Post subject: | Re: 1125 cr brake pads |
EBC FA460HH .......I keep them in stock if someone wants to collect for you
|
|
| Author: | Hawk13 [ 23 Aug 2013 11:56 ] |
| Post subject: | Re: 1125 cr brake pads |
pash wrote: Why not fit a Brembo then you will never have problems buying pads again... viewtopic.php?p=189975#p189975 I may even have one lurking in the garage that you can have for £30. Can I have it? |
|
| Author: | albert666 [ 24 Aug 2013 22:04 ] |
| Post subject: | Re: 1125 cr brake pads |
i did the brembo mod after my seizure, definately worth it
|
|
| Author: | boxermoses [ 27 Aug 2013 12:36 ] |
| Post subject: | Re: 1125 cr brake pads |
Whats the brembo off and is it a straight fit or are additional plates/mounts needed? I was hoping free spirits were gona make an 1125 version of this: http://www.freespirits.it/en/component/ ... l?Itemid=0 |
|
| Author: | pash [ 27 Aug 2013 12:51 ] |
| Post subject: | Re: 1125 cr brake pads |
Why would you want on if those, based on my experience with the Brembo, that Hawk has just had off me, when fitted to my S1s and XBs, there is more control and you can lock the rear wheel with ease... That caliper is fitted as a single caliper to bikes in the weight category as the 1125... |
|
| Author: | boxermoses [ 27 Aug 2013 12:54 ] |
| Post subject: | Re: 1125 cr brake pads |
It was the only upgrade it had noticed for the Buell until this post. Cool I shall have a good look on ebay and see what I can find, it will be a winter project anyway |
|
| Author: | pash [ 27 Aug 2013 13:08 ] |
| Post subject: | Re: 1125 cr brake pads |
It fits Monsters and 748s and Ducatis like that... |
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|