| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| HPC OIL PUMP GEAR https://www.ukbeg.com/forum/viewtopic.php?f=7&t=15831 |
Page 1 of 2 |
| Author: | WILLYBUELL [ 04 Nov 2012 22:42 ] |
| Post subject: | HPC OIL PUMP GEAR |
right two people have sent me a PM to see if i will get them a HPC gear ,4 weeks lead time to get them ,if i order 6 there around 70 quid each .sadly the price will not reduce much ordering up to 10 ,SO who needs a gear |
|
| Author: | brother in buells [ 05 Nov 2012 12:55 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
Willy, I'm interested in one hpc gear. But tell me what makes it a better one than the beryllium bronze drive-gear? (asked that allready in your other post ,so here we go again) i understand its hardened ,but in case you have the oilpump gear precisely aligned with the drive-gear ,does it make any difference if there is a hpc-one or beryllium? The hardened against the more forgiving one so maybe its a better question ,what did make you deside to go for the hpc gear? Thanks 
|
|
| Author: | WILLYBUELL [ 06 Nov 2012 08:16 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
the bronze one has a supposed longer life cycle but is still know to fail as in wear out .the gains using the lucky hands gear or the hpc gear is that they are the same hardness as the oil pump gear on the spindal ,rockwell 58 plus HARD ,the industry standerd for gerarbox gears IS rockwell 58 thus giveing a much extended life cycle , |
|
| Author: | Jim [ 06 Nov 2012 11:30 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
Willy, PM'd Nick with my order following your reply. PM me with payment details Cheers. jim |
|
| Author: | pash [ 09 Nov 2012 17:53 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
After discussing this with Willy and based on the price and pedigree of the Lucky Hands item, with six orders under my belt, I bought another ten. I have four left. £62.50 each (which includes postage to a UK address). PM me if interested. |
|
| Author: | pash [ 09 Nov 2012 19:16 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
Down to three |
|
| Author: | kevmean [ 09 Nov 2012 21:44 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
pash wrote: Down to three Maybe I should add one to my spares for muffin 
|
|
| Author: | Jill Brown [ 09 Nov 2012 21:57 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
You could build another couple of bikes from your spares........looking forward to Sproutfest to see how much you will buy this year.... 
|
|
| Author: | kevmean [ 09 Nov 2012 22:00 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
Jill Brown wrote: You could build another couple of bikes from your spares........looking forward to Sproutfest to see how much you will buy this year.... I'm skint lol ............don't forget there's another bike here taking my cash as well at the minute lol |
|
| Author: | Jill Brown [ 09 Nov 2012 22:07 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
Yeah, yeah, yeah....whatever..... lol
|
|
| Author: | pash [ 10 Nov 2012 10:32 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
pash wrote: After discussing this with Willy and based on the price and pedigree of the Lucky Hands item, with six orders under my belt, I bought another ten. I have four left. £62.50 each (which includes postage to a UK address). PM me if interested. Still 3 left |
|
| Author: | pash [ 10 Nov 2012 11:54 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
2 left |
|
| Author: | pash [ 10 Nov 2012 17:15 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
1 left |
|
| Author: | pash [ 10 Nov 2012 19:58 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
0 left If ten more people want one I will order more... |
|
| Author: | bueller ball breaker [ 10 Nov 2012 20:27 ] |
| Post subject: | Re: HPC OIL PUMP GEAR |
Free fitting deal 
|
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|