UK Buell Enthusiasts Group
https://www.ukbeg.com/forum/

X1 injectors flow rate?
https://www.ukbeg.com/forum/viewtopic.php?f=7&t=13946		 Page 1 of 1
Author:  gunter [ 26 Mar 2012 10:00 ]
Post subject:  X1 injectors flow rate?
I'm looking for the flow rate of X1 injectors (part-# 29533-99Y, superseeded later by P0786.02A8) or a cross reference, if there is one available, to look it up here: http://www.witchhunter.com/injectordata1.php4

Anyone here who could help me?

Thanks,
Gunter
Author:  pash [ 26 Mar 2012 20:45 ]
Post subject:  Re: X1 injectors flow rate?
Not that I have a number of spare injectors, I had a check and found some numbers; looks like they are Siemens 01f008a.

Tried your link and found no similarities so did a google and found these:

http://www.harley-davidson-forum.net/sh ... php?t=7813

http://xlforum.net/vbportal/forums/arch ... 68753.html

but this is probably what you need:

http://www.ebay.co.uk/itm/BUELL-XB9-REC ... 0051712295
Author:  gunter [ 26 Mar 2012 21:51 ]
Post subject:  Re: X1 injectors flow rate?
Quote:
looks like they are Siemens 01f008a


Bingo! :worthy: That part number rings a bell, so I'm quite sure I looked them up before :roll:

If these are 120 cc/min (< 11 lbs/hr), then it's much less than the flow rate from the later injectors. They deliver about 32 lbs/hr @ 50 PSI, which is very roughly 290 cc/min @ 300 kPa. This explains why I have to use much larger numbers in the fuel maps then.
Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/