It is currently 20 Jul 2025 14:55

All times are UTC+01:00




Post new topic  Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Don't mind me, mate!
PostPosted: 14 Sep 2011 15:35 
Offline
User avatar

Joined: 15 May 2009 12:32
Posts: 673
London parking strikes again.

What is it about people who have large bikes that they feel that they have a right to squeeze their oversized bikes into gaps a scooter will struggle with and end up scratching my bike?

Only a couple of scuffs that I can probably fix, but for f**k's sake, if the gaps too small, piss off an park somewhere else.

Just cause your bike's banged up doesn't mean you can bang mine up!

Grrrrr.

_________________
"Because it's awesome" is always a good enough excuse

http://www.eugenereisch.com


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 09:35 
Offline
User avatar

Joined: 15 May 2009 12:32
Posts: 673
... And this morning I've dropped my brand new Caberg carbon helmet... Massive crack in the top :(

That's 2 bits of bad news... Just waiting for the third
:sad1:

_________________
"Because it's awesome" is always a good enough excuse

http://www.eugenereisch.com


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 09:46 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
A crack? What would have happened if it had been involved on an accident?

I think they should be giving you your money back...

_________________
08 Specialized Langster


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 10:51 
Offline
User avatar

Joined: 15 May 2009 12:32
Posts: 673
Yeah that too, though it actually hit a sharp corner of stone pretty hard right on the 'flat' top of the helmet from up on top of my topbox (which I NEVER do in case if exactly this event!) straight down

I kinda saw it in slow motion as I was yelling "Noooooo!"

_________________
"Because it's awesome" is always a good enough excuse

http://www.eugenereisch.com


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 12:45 
Offline
User avatar

Joined: 06 May 2009 18:54
Posts: 586
Current ride: Lots
Location: Here n there
stinkerbill wrote:
Yeah that too, though it actually hit a sharp corner of stone pretty hard right on the 'flat' top of the helmet from up on top of my topbox (which I NEVER do in case if exactly this event!) straight down

I kinda saw it in slow motion as I was yelling "Noooooo!"


Pash is right, what good is a helmet if it cracks open when dropped from a couple of feet? it is supposed to protect you if you fall off a motorcycle, even at Buell speeds you will be travelling a bit faster than that! Disgraceful rubbish.....

_________________
Life is short - drink the good wine first


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 12:49 
Offline
User avatar

Joined: 15 May 2009 12:32
Posts: 673
Of course you're right, but I might be over egging the pudding - it's on obvious crack, not like it's split in 2 ;)

Either way I much doubt any of my previous helmets would have survived the same fall and impact.

Hmm... Maybe they would...

Anyhow... I guess I'll be off to the helmet store in Saturday for something NOT carbon.

(and write a letter to Caberg...)

_________________
"Because it's awesome" is always a good enough excuse

http://www.eugenereisch.com


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 17:42 
Offline
User avatar

Joined: 06 May 2009 18:54
Posts: 586
Current ride: Lots
Location: Here n there
stinkerbill wrote:
Of course you're right, but I might be over egging the pudding - it's on obvious crack, not like it's split in 2 ;)

Either way I much doubt any of my previous helmets would have survived the same fall and impact.

Hmm... Maybe they would...

Anyhow... I guess I'll be off to the helmet store in Saturday for something NOT carbon.

(and write a letter to Caberg...)


Not sure that it's a carbon problem.....I bashed an HJC carbon affair pretty heavily (can't do light crashes when one is a lardy incompetent) at Pembrey a couple of years ago, it went back through scrutineering and I used it for the rest of the meeting .....

_________________
Life is short - drink the good wine first


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 18:24 
Offline
Mr. Tourettes
User avatar

Joined: 06 May 2009 13:51
Posts: 2450
Location: cambs
Sounds like a manufaturing defect.... :? :? :o :o

_________________
xxxx


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 18:36 
Offline
User avatar

Joined: 05 May 2009 20:00
Posts: 11037
Current ride: X1 2001
Location: southampton
richie wrote:
Sounds like a manufaturing defect.... :? :? :o :o


must be to much lard

_________________
Feros Ferio


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 19:08 
Offline
Mr. Tourettes
User avatar

Joined: 06 May 2009 13:51
Posts: 2450
Location: cambs
:hehe: :hehe: :hehe:

_________________
xxxx


Top
 Post subject: Re: Don't mind me, mate!
PostPosted: 15 Sep 2011 21:37 
That's bad luck Eugene, and worse than that I've just bought the same helmet !


Top
   
 Post subject: Re: Don't mind me, mate!
PostPosted: 16 Sep 2011 10:44 
Offline
User avatar

Joined: 15 May 2009 12:32
Posts: 673
:? Well, hopefully mine was just an unlucky 'bounce' ?

I went via a bike shop last night and bought a Shark S900 in the graphite colour on sale for £160 - it's also got a 4-star Sharp rating compared to the Caberg Carbon's 3-stars

Really comfy and so far no issues, so £160 down, but happy with it :yup:

_________________
"Because it's awesome" is always a good enough excuse

http://www.eugenereisch.com


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited