UK Buell Enthusiasts Group
https://www.ukbeg.com/forum/

hello
https://www.ukbeg.com/forum/viewtopic.php?f=4&t=9690		 Page 1 of 1
Author:  dex [ 23 Jan 2011 18:05 ]
Post subject:  hello
hi, i am looking for information on buell ulysses. i am looking at buying one, so any help would be very helpfull?. one model is a 05 with 13 thou on the clock, the other is a 08 with 15 thou on the clock,
question 1. are the engines the same on both as the bottom right side engine casings are different. is the 08 rubber mounted?
q.2. what should i look for with belt condition, i had a sportster and the rear pully had two sides to it, only one on the uly. how does this effect the belt alignment and life.
ive had guzzis for a few years and i am used to paint flying off but the 08 was almost bald is this normal.
anyway my name is derek and i live near dalkeith in scotland been riding for 27 years and look forward to 27 more.
cheers, derek. :4roz:
Author:  Nutah [ 23 Jan 2011 18:15 ]
Post subject:  Re: hello
Hi Dex have a look in tech & Buell chat :yup:
Author:  dex [ 23 Jan 2011 18:19 ]
Post subject:  Re: hello
cheers i will have a browse and see what i can find
Author:  richie [ 23 Jan 2011 20:10 ]
Post subject:  Re: hello
dex wrote:
cheers i will have a browse and see what i can find

talk to norrie, he is just up the road,.....good luck lOl send PM :idea:
Author:  dex [ 23 Jan 2011 20:17 ]
Post subject:  Re: hello
who is norrie and what is a pm!
Author:  Adam [ 23 Jan 2011 20:27 ]
Post subject:  Re: hello
richie wrote:
dex wrote:
cheers i will have a browse and see what i can find

talk to norrie, he is just up the road,.....good luck lOl send PM :idea:



No he's not; he's been at my gaff all weekend ;) lOl
Author:  Nutah [ 23 Jan 2011 20:29 ]
Post subject:  Re: hello
PM personal message click on the button below
marked pm , then you can send a message that only that member can see :yup:
Author:  Tigs [ 23 Jan 2011 20:30 ]
Post subject:  Re: hello
dex wrote:
who is norrie and what is a pm!


Welcome Dex. Norrie is another member who lives not far from you and a PM is a personal message see bottom left of your post for the button ;)
Author:  Nutah [ 23 Jan 2011 20:35 ]
Post subject:  Re: hello
:hehe: echo...
Author:  Ash [ 23 Jan 2011 20:39 ]
Post subject:  Re: hello
Adam wrote:

No he's not; he's been at my gaff all weekend ;) lOl


I bet the poor lad is knackered!
Author:  CJ [ 24 Jan 2011 20:44 ]
Post subject:  Re: hello
Derek - welcome to UKBEG :D...

My 30,000 mile 08 spec Ulysses report can be found: here

Thunderstorm V-Twin Engines – 2008 updates:

The rest of the Buell 1203cc and 984cc range use an updated version of the Thunderstorm engine.

The timing cover is eliminated, as the engine is now crank timed from a new crank position sensor, which eliminates the need for manual timing, reducing maintenance costs. The ECM actively monitors and adjusts timing based on the riding environment. The new sensor makes thirty reads per revolution, compared to the previous two reads per revolution, for more precise control of fuel mapping and timing to conditions.

Additional updates to all 2008 Thunderstorm engines include:

The size of the crankpins is increased to 1.5 inches from 1.25 inches.

A higher-output oil pump supports oiling to the new crankpin area. The new oil pump is driven off the crank – a design based on the Buell XBRR production racing motorcycle.

A new eight-row oil cooler offers enhanced cooling and all oil line ends are now equipped with jiffy-tite fittings.

A new ECM with increased computing capacity.

DDFI 3 actively controls and monitors the TPS (throttle position sensor) IAC (idle air control) and timing. DDFI 3 automatically zeros the TPS and adjusts fuel metering for a smoother idle, eliminating service intervals and reducing the cost of ownership.

A new progressive throttle cam and cables provide smoother throttle input from stops and requires less rotation to full throttle.
Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/