hi all

iv been riding harleys for a few years now , have a 1990 fxrs 1340 and a 2002 883r sporster bored to 1200cc

love them both but wanted something to play with , jap stuff just dont do it for me so the best thing was a buell

bought a 2005 xb12ss two weeks ago what a laugh it is

it was standard when i got it , within 3 days out came the plasma cutter and chopped up the exhaust now thats how it should sound , then out with the grinder and off came the stupid thing stuck out the back

just ordered a k&n and will be looking at other mods , so shall be seeking advise on things as i go

cheers
Lee

Welcome Lee,

Yep they are good fun alright. Evercreech, not to far from a few of us in the Yeovil area.

Mr Nutter, check the routing of the throttle cables around the headstock on full L/H lock. Remember at all times, Forrest Gump assembled these bikes

_________________
If your dreams don't scare you, they are not big enough.

how do

yep not far from yeovil may see u about



cheers adam , iv fitted pro taper bars and already re routed the cables

_________________
If your dreams don't scare you, they are not big enough.

Hi Lee
You do realise modifying the standard exhaust causes the cylinder heads to melt!






And welcome

_________________
aka DrBagiva, DrBusqvarna, Uncle Knobhead

hi


whats this about melting heads ?
how / why does a modded can cause heat problems and not a aftermarket can ?

DrBuella caught a big one there...


Lee, he's yanking your chain.

_________________
Good in straight lines
2001 X1 "The Tart's Handbag"
2001 FZS1000 "The Fridge"

odear

In the net

_________________
aka DrBagiva, DrBusqvarna, Uncle Knobhead