UK Buell Enthusiasts Group
https://www.ukbeg.com/forum/

New to Buell.
https://www.ukbeg.com/forum/viewtopic.php?f=4&t=13145		 Page 1 of 2
Author:  Bikeralw [ 15 Dec 2011 19:54 ]
Post subject:  New to Buell.
Hi from a new member. I'm long term Guzzi/GS BMW rider trying something different. An 07 Ulysses. Due to the snow I've only managed a short blast round the country roads so far.
All good, but just one thing, the bike is fitted with a Remus can, does this mean I lose the jacking points?
Merry Christmas from the snow covered High Peak.
Al
Author:  Nutah [ 15 Dec 2011 21:42 ]
Post subject:  Re: New to Buell.
welcome Al :yup:
not sure but i wouldn't risk it :shock:
just get a paddock stand
Author:  TOPGUMM [ 15 Dec 2011 22:51 ]
Post subject:  Re: New to Buell.
Welcome .Merry Christmas to the snow covered High Peak.
Author:  daywalker [ 16 Dec 2011 09:26 ]
Post subject:  Re: New to Buell.
Yeah don't jack the bike up on the remus it will dent as it hasn't got the reinforcing/baffles inside like the STD can.

Oh and welcome! :)
Author:  Bikeralw [ 16 Dec 2011 14:59 ]
Post subject:  Re: New to Buell.
Thanks for that, I thought I wouldn't be able to jack on the Remus. I have paddock stands, but really want the front forks dangling free, any easy suggestions? First bike ever without a centre stand!
Author:  comino [ 16 Dec 2011 16:08 ]
Post subject:  Re: New to Buell.
Bikeralw wrote:
Thanks for that, I thought I wouldn't be able to jack on the Remus. I have paddock stands, but really want the front forks dangling free, any easy suggestions? First bike ever without a centre stand!


Yoke stand?
http://www.americansportbike.com/shopon ... /5589.html

Easy
Can you suspend the handlebars from the ceiling?.
I use 2 adjustable straps attached to the bars suspended from a beam in the shed.
To change the head bearings i have to remove the exhaust and then use a jack.
Author:  raven684 [ 16 Dec 2011 18:49 ]
Post subject:  Re: New to Buell.
Hi,,and welcome..from buxton :D
Author:  Bikeralw [ 16 Dec 2011 19:42 ]
Post subject:  Re: New to Buell.
raven684 wrote:
Hi,,and welcome..from buxton :D

Two of us in a small town??
Author:  Nutah [ 16 Dec 2011 19:45 ]
Post subject:  Re: New to Buell.
Bikeralw wrote:
raven684 wrote:
Hi,,and welcome..from buxton :D

Two of us in a small town??



Image ;) :hehe:
Author:  raven684 [ 16 Dec 2011 20:18 ]
Post subject:  Re: New to Buell.
Two of us in a small town?? yeah mate..im up in harpur..black and silver xb9sx stealth can on it. :D
Author:  Bikeralw [ 16 Dec 2011 20:37 ]
Post subject:  Re: New to Buell.
raven684 wrote:
Two of us in a small town?? yeah mate..im up in harpur..black and silver xb9sx stealth can on it. :D

Brown Edge. I can hear your banjo from here :shock:
Author:  DrBuella [ 16 Dec 2011 22:12 ]
Post subject:  Re: New to Buell.
Welcome-my STT has an unnerving habit of running out of fuel when ever I get near King Sterndale!
:oooops:
Author:  markp [ 17 Dec 2011 09:48 ]
Post subject:  Re: New to Buell.
Hiya
welcome. I jacked on my remus since new, I made a piece of wood to the same contour as the remus - jack onto the wood. Not done any damage at all.

Mark
Author:  Adam [ 17 Dec 2011 10:32 ]
Post subject:  Re: New to Buell.
raven684 wrote:
Two of us in a small town?? yeah mate..im up in harpur..black and silver xb9sx stealth can on it. :D



Mornin', has that industrial complex been built in Harpur Hill quarry yet? Do you happen to know if climbing is still banned there?
Author:  raven684 [ 17 Dec 2011 10:56 ]
Post subject:  Re: New to Buell.
Brown edge...you must know Andy austin then?...my banjo isnt playing at the moment. :shock: :D
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/