hi folks , just bought a m2 cyclone , fantastic , 98 model but only done 8k its immculate , in black , vance and hines , stage 1 screaming eagle , sounds awesome , hooked now , , buell tank decal bubbling any fixes or ideas what to do ?
cheers all

welcome sounds a nice Buell

undo the fuel cap , overnight as it helps it vent
otherwise the vapour vents through the tank skin & bubbles the stickers
bit of Buell characteristic that

_________________
Feros Ferio

welcome........ another proper buell

_________________
Last year I joined a group for anti-social people
We haven't met yet.

thanks nutah , will do that

..........he's not wrong you know - welcome

I never knew that? I thought it was something to do with the adhesive on the decals reacting with the paint?

_________________
In a purple fug

Hi

welcome m8



only time you will get reaction is if base hasnt cured and you get vapour off solvent rising under decal, also might be best to apply decals over clearcote instead of clearcoting over decals, but whatever you do , do not be tempted to paint tank and then when paint seems touch dry to apply decals, gotta wait 24 hours at least on normal jobs,
would have thought with adhesion promoter and plastic primer properly applied, then you would not get vapours off fuel coming through if left for about 2 weeks or more before you put fuel into tank, or use PR-1005L at £115 per 5 litres to line tank.


steve

hello new tuber good choice