The X1 pipes can be made to fit a slimline frame if you cut and sleeve them behind the frame rail. Much neater and you don't need a heat shield. I've done this on my M1
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| S1 downpipes https://www.ukbeg.com/forum/viewtopic.php?f=11&t=7234 |
Page 1 of 1 |
| Author: | Dave from Scotland [ 25 Jun 2010 01:33 ] |
| Post subject: | S1 downpipes |
Does anyone have a set of S1 downpipes going spare? They will go to a loving home! Dave |
|
| Author: | iwoo9 [ 25 Jun 2010 13:06 ] |
| Post subject: | Re: S1 downpipes |
A remark from a position of ignorance (like most of mine). I have a set of UK down pipes from a 2001 X1 if that helps. |
|
| Author: | Lucky [ 25 Jun 2010 13:29 ] |
| Post subject: | Re: S1 downpipes |
Dave from Scotland wrote: Does anyone have a set of S1 downpipes going spare? They will go to a loving home! Dave I am intrigued, are you expecting to get these FOC? Its just that I presumed that parts for an S1 would be expensive? |
|
| Author: | Adam [ 25 Jun 2010 16:42 ] |
| Post subject: | Re: S1 downpipes |
The X1 pipes can be made to fit a slimline frame if you cut and sleeve them behind the frame rail. Much neater and you don't need a heat shield. I've done this on my M1
|
|
| Author: | Beef [ 25 Jun 2010 19:16 ] |
| Post subject: | Re: S1 downpipes |
I've got a standard set...but I'm not giving them away  Adam wrote: The X1 pipes can be made to fit a slimline frame if you cut and sleeve them behind the frame rail. Much neater and you don't need a heat shield. I've done this on my M1 Youcould, but for me, the S1 pipes are the best lookin EVER.....FACT 
|
|
| Author: | pash [ 25 Jun 2010 21:39 ] |
| Post subject: | Re: S1 downpipes |
Beef wrote: I've got a standard set...but I'm not giving them away Adam wrote: The X1 pipes can be made to fit a slimline frame if you cut and sleeve them behind the frame rail. Much neater and you don't need a heat shield. I've done this on my M1 Youcould, but for me, the S1 pipes are the best lookin EVER.....FACT Says the man with taste... 
|
|
| Author: | Beef [ 25 Jun 2010 23:10 ] |
| Post subject: | Re: S1 downpipes |
I do have taste Pash............its just not the same as yours!! 
|
|
| Author: | Maz [ 25 Jun 2010 23:42 ] |
| Post subject: | Re: S1 downpipes |
....or mine
|
|
| Author: | Beef [ 26 Jun 2010 05:23 ] |
| Post subject: | Re: S1 downpipes |
Thank god-If I did, I'd shave my head, work in a cave, smoke rollies like they're going out of fashion and hardly ever ride my Bu..................oh dammit, I'm a quarter of the way there 
|
|
| Author: | Dave from Scotland [ 26 Jun 2010 23:05 ] |
| Post subject: | Re: S1 downpipes |
Lucky wrote: I am intrigued, are you expecting to get these FOC? Its just that I presumed that parts for an S1 would be expensive? LOL - no, not at all! I expect to pay at least the going rate (whatever that is). I am certainly not lexpecting anything FOC. I can, however, entirely see how my original post could be read that way. I think it has to be S1 headers, precisely for the reason that GM mentioned about the way they route around the engine / frame. Dave |
|
| Author: | pash [ 27 Jun 2010 07:13 ] |
| Post subject: | Re: S1 downpipes |
http://cgi.ebay.com/ebaymotors/Buell-19 ... 35a92e9712 |
|
| Author: | Maz [ 28 Jun 2010 09:55 ] |
| Post subject: | Re: S1 downpipes |
Bear in mind that those are US spec. ie. 2.5'' collector. |
|
| Author: | retromlc [ 29 Jun 2010 12:59 ] |
| Post subject: | Re: S1 downpipes |
are the 98 m2 header pipes the same |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|