| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| X1 headers https://www.ukbeg.com/forum/viewtopic.php?f=11&t=41 |
Page 1 of 1 |
| Author: | Spook [ 06 May 2009 15:49 ] |
| Post subject: | X1 headers |
Wanted a set of standard X1 headers. Did I mention they had to be cheap, not like TN's spark plugs though. |
|
| Author: | kevmean [ 07 May 2009 20:30 ] |
| Post subject: | Re: X1 headers |
Spook wrote: Wanted a set of standard X1 headers. Did I mention they had to be cheap, not like TN's spark plugs though. Have got a spare set somewhere Spook will dig them out ...if i remember right they are ceramic coated in silver but had a couple of marks on them 
|
|
| Author: | pontiusxbazooka [ 07 May 2009 22:03 ] |
| Post subject: | Re: X1 headers |
i've got a set of a 99 M2 (same part no i understand) no damage, just the usual discolouration!.. |
|
| Author: | kevmean [ 08 May 2009 14:41 ] |
| Post subject: | Re: X1 headers |
pontiusxbazooka wrote: i've got a set of a 99 M2 (same part no i understand) no damage, just the usual discolouration!.. M2's aren't the same .............X1's have the lambda sensor port M2's don't |
|
| Author: | pontiusxbazooka [ 08 May 2009 15:06 ] |
| Post subject: | Re: X1 headers |
kevmean wrote: pontiusxbazooka wrote: i've got a set of a 99 M2 (same part no i understand) no damage, just the usual discolouration!.. M2's aren't the same .............X1's have the lambda sensor port M2's don't well they've got the threaded port for the sensor with a blanking plug!... 
|
|
| Author: | kevmean [ 08 May 2009 16:52 ] |
| Post subject: | Re: X1 headers |
pontiusxbazooka wrote: kevmean wrote: pontiusxbazooka wrote: i've got a set of a 99 M2 (same part no i understand) no damage, just the usual discolouration!.. M2's aren't the same .............X1's have the lambda sensor port M2's don't well they've got the threaded port for the sensor with a blanking plug!... Then they are X1 headers with a blanking plug but will fit the later M2 as well
|
|
| Author: | Spook [ 08 May 2009 19:41 ] |
| Post subject: | Re: X1 headers |
sorted thank you. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|