Does anyone (Pash
) know the proper name for these bolts and where to obtain them ?
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| Firebolt saddle bolts https://www.ukbeg.com/forum/viewtopic.php?f=11&t=22264 |
Page 1 of 1 |
| Author: | Dewalt [ 23 Mar 2017 22:47 ] |
| Post subject: | Firebolt saddle bolts |
Does anyone (Pash ) know the proper name for these bolts and where to obtain them ?
|
|
| Author: | kevmean [ 24 Mar 2017 03:22 ] |
| Post subject: | Re: Firebolt saddle bolts |
I made my own for the 1125  1125 are metric and XB are unc
|
|
| Author: | pash [ 24 Mar 2017 06:10 ] |
| Post subject: | Re: Firebolt saddle bolts |
Seat quick releases? Do TM sell them? I thought about making some but struggled to understand what I needed to access under the seat that I couldn't wait the two minutes it takes to remove the screws  .http://www.badweatherbikers.com/buell/m ... 1235431425 http://badweatherbikers.com/buell/messa ... 1078964118 http://www.buellxb.com/forum/showthread ... elease-Mod |
|
| Author: | Dewalt [ 24 Mar 2017 20:10 ] |
| Post subject: | Re: Firebolt saddle bolts |
Thanks Kev & Pash, when at Twin's I'll ask, don't like going through their site. My charging connector for the battery is under the saddle but will change that to the rear compartment. |
|
| Author: | pash [ 24 Mar 2017 22:45 ] |
| Post subject: | Re: Firebolt saddle bolts |
I was considering a simpler design (when I should have been working). When do you need them dearest Walt? |
|
| Author: | jeznewsome [ 28 Mar 2017 19:16 ] |
| Post subject: | Re: Firebolt saddle bolts |
Interested if you are making some Pash as I always though the bolt location was a bit rubbish |
|
| Author: | pash [ 28 Mar 2017 19:24 ] |
| Post subject: | Re: Firebolt saddle bolts |
I'll scheme something up |
|
| Author: | Adam [ 28 Mar 2017 22:00 ] |
| Post subject: | Re: Firebolt saddle bolts |
Dewalt wrote: Thanks Kev & Pash, when at Twin's I'll ask, don't like going through their site. My charging connector for the battery is under the saddle but will change that to the rear compartment. Glad it's not just me. I wanted to buy some stuff for a bike once and couldn't get on with their site at all. Went elsewhere in the end. Others have told me the same. I don't know if it's still the same, but I've not tried since. |
|
| Author: | pash [ 29 Mar 2017 05:39 ] |
| Post subject: | Re: Firebolt saddle bolts |
Adam wrote: Dewalt wrote: Thanks Kev & Pash, when at Twin's I'll ask, don't like going through their site. My charging connector for the battery is under the saddle but will change that to the rear compartment. Glad it's not just me. I wanted to buy some stuff for a bike once and couldn't get on with their site at all. Went elsewhere in the end. Others have told me the same. I don't know if it's still the same, but I've not tried since. I struggle with it. The search comes up with thousands of stuff, despite what you put in the search box it seems to show you their whole catalogue. |
|
| Author: | Dewalt [ 29 Mar 2017 08:10 ] |
| Post subject: | Re: Firebolt saddle bolts |
pash wrote: I was considering a simpler design (when I should have been working). When do you need them dearest Walt? I'll pick them up this weekend, if thats ok ? or any other time is fine Pash. About Twin; it's a 40 min. drive for me, I just visit them and ask Budje my silly questions. Help offered if anyone needs some. |
|
| Author: | nickyb [ 07 May 2017 10:30 ] |
| Post subject: | Re: Firebolt saddle bolts |
made mine, pushed out the steel insert from the seat, drilled a hole through the head of a bolt, fitted a R clip, and the spaced the bolt from the frame to get the correct height. then stood back and just stared at my Buell for about an hour. |
|
| Author: | Dewalt [ 11 May 2017 10:15 ] |
| Post subject: | Re: Firebolt saddle bolts |
nickyb wrote: made mine, pushed out the steel insert from the seat, drilled a hole through the head of a bolt, fitted a R clip, and the spaced the bolt from the frame to get the correct height. then stood back and just stared at my Buell for about an hour. Proper solution  but I hope Pash will come up with something 
|
|
| Author: | Looey [ 12 May 2017 09:55 ] |
| Post subject: | Re: Firebolt saddle bolts |
Was just looking for same, or some other solution! Would be interested if you were making up some too pash |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|