Do you have a skinny or lardy m2
If it's a skinny, I guess you are referring to the plastic lump on the back of this:-
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| m2 rear fender, number plate hanger thingy https://www.ukbeg.com/forum/viewtopic.php?f=11&t=18773 |
Page 1 of 1 |
| Author: | sloppy [ 19 May 2014 09:05 ] |
| Post subject: | m2 rear fender, number plate hanger thingy |
Still after one of these if anybody has such a thing kicking around in there shed. Much appreciated. |
|
| Author: | TOPGUMM [ 19 May 2014 20:01 ] |
| Post subject: | Re: m2 rear fender, number plate hanger thingy |
Is it this part. http://www.ebay.co.uk/itm/BUELL-S1-REAR ... 2c813e2955 S1 the same as a Cyclone? |
|
| Author: | sloppy [ 20 May 2014 07:42 ] |
| Post subject: | Re: m2 rear fender, number plate hanger thingy |
H,i thanks but I don't think it will fit. The M2 one is a plastic ugly looking thing, very mid 90's. I want to keep my standard one and get another one to chop it up and tidy up the back end so condition is not an issue. Cheers Ian. |
|
| Author: | Bonzo [ 21 May 2014 09:50 ] |
| Post subject: | Re: m2 rear fender, number plate hanger thingy |
Do you have a skinny or lardy m2 If it's a skinny, I guess you are referring to the plastic lump on the back of this:-
|
|
| Author: | sloppy [ 21 May 2014 15:41 ] |
| Post subject: | Re: m2 rear fender, number plate hanger thingy |
 Yeah that's the sucker. Uglee. I want to chop up so I can put back to standard when she moves on to someone else...... Got one? |
|
| Author: | gusm2 [ 21 May 2014 15:55 ] |
| Post subject: | Re: m2 rear fender, number plate hanger thingy |
Seems a shame to chop one up, a lot of parts for these bikes are NLA, why not take it off and just make a bracket/hanger or whatever out of ally, then refit the original when you punt it on 
|
|
| Author: | Bonzo [ 22 May 2014 07:02 ] |
| Post subject: | Re: m2 rear fender, number plate hanger thingy |
sloppy wrote: :yup: Yeah that's the sucker. Uglee. I want to chop up so I can put back to standard when she moves on to someone else...... Got one? Not any more. I used to have one on my old M2. replaced it with a tail tidy, and I guess the original went with the bike when I sold it. Looked much better without it  
|
|
| Author: | sloppy [ 22 May 2014 07:45 ] |
| Post subject: | Re: m2 rear fender, number plate hanger thingy |
I thought about making something out of ali and may still do that, but just wanted to see if I could get a plastic one and chop cos I'm lazy......  Has anybody ever made a bracket up from scratch, any pointers or ideas would be welcomed. I was a bit unsure about how strong the bonding was on the plastic under the seat where the light fits, didn't want to put too much pressure on it hanging plate and indicators off it in case it snapped off. Cheers |
|
| Author: | Bonzo [ 22 May 2014 07:51 ] |
| Post subject: | Re: m2 rear fender, number plate hanger thingy |
sloppy wrote: I was a bit unsure about how strong the bonding was on the plastic under the seat where the light fits, didn't want to put too much pressure on it hanging plate and indicators off it in case it snapped off. Cheers The bonding is crap, mine fell off once. After that I bolted it through the bolt holes that hold the tailpiece in place. This is also where you bolt up a tail tidy. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|