Or a broken ones as I only need the high/low beam switch assembly

Don't know if the X1 switchgear is the same ?

Or what other bikes did this switchgear fit to ? Ducati ??

_________________
Should Have Stuck To making Tubers

X1 is identical
XB is the same but has a different plug

_________________
08 Specialized Langster

Left switchgear is one of the few parts i don't have spare ......... Just out of interest the 1125 appears to be the same switchgear as well and mine actually had the problem at the weekend that a lot of American friends on badweb have often complained about where after washing the bike the left hand indicator came on and would not turn off , neither pushing the cancel or trying to turn the right hand indicator on did any good at all. The problem was cured by spraying WD40 into the housing where the cables exit, my only thought on this is i've never heard of people having this problem on Tubers or XB's so it made me wonder if the fact the 1125's are using low current led's and without a conventional flasher relay if it needs a smaller short circuit current through moisture to trigger the indicators than on the other models?

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.