Cornwall is a bit further
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| 1125CR WANTED https://www.ukbeg.com/forum/viewtopic.php?f=11&t=16829 |
Page 1 of 2 |
| Author: | Thedieseldoc [ 23 Apr 2013 19:35 ] |
| Post subject: | 1125CR WANTED |
Wanted 1125cr anything considered,, Gary |
|
| Author: | TOPGUMM [ 23 Apr 2013 19:40 ] |
| Post subject: | Re: 1125CR WANTED |
http://www.ebay.co.uk/itm/RED-2010-BUEL ... 257d07c693 |
|
| Author: | Thedieseldoc [ 23 Apr 2013 21:00 ] |
| Post subject: | Re: 1125CR WANTED |
This guy was punting this about on Facebook about a week ago, messaged him and he recons he's been offered 3600 off dealer, good luck I say cos ain't worth that and he's saying its in vgc it looks a bit scruffy to me and its in bloody Devon can you get any further away from Durham |
|
| Author: | pash [ 23 Apr 2013 21:10 ] |
| Post subject: | Re: 1125CR WANTED |
Cornwall is a bit further
|
|
| Author: | Thedieseldoc [ 23 Apr 2013 21:55 ] |
| Post subject: | Re: 1125CR WANTED |
Not bloody much when you've travelled that far, and as maz has just pointed out its due a 1200 quid service, so might give it a bit of a wide berth. 
|
|
| Author: | sportster_mann [ 24 Apr 2013 10:16 ] |
| Post subject: | Re: 1125CR WANTED |
Does look to be a genuine 2010 model, so a rare beast though ! If you decide to go for it, ask them to confirm that it has the oil sight window on the motor. Oh, and that exhaust probably won't last much longer ... |
|
| Author: | Hawk13 [ 24 Apr 2013 10:32 ] |
| Post subject: | Re: 1125CR WANTED |
I'm amazed by the prices that these (don't) fetch and the attitudes of purchasers. £3600 gets you a lot of bike and much newer than a comparably priced Tuono, Superduke, Speed Triple etc. It's beyond me how people think it isn't worth that! And the seller says it has FSH - so at 12,400 miles I woudl expect the 12k service to have been done
|
|
| Author: | kevmean [ 24 Apr 2013 10:37 ] |
| Post subject: | Re: 1125CR WANTED |
Hawk13 wrote: I'm amazed by the prices that these (don't) fetch and the attitudes of purchasers. £3600 gets you a lot of bike and much newer than a comparably priced Tuono, Superduke, Speed Triple etc. It's beyond me how people think it isn't worth that! And the seller says it has FSH - so at 12,400 miles I woudl expect the 12k service to have been done 
|
|
| Author: | kevmean [ 24 Apr 2013 10:40 ] |
| Post subject: | Re: 1125CR WANTED |
sportster_mann wrote: Does look to be a genuine 2010 model, so a rare beast though ! If you decide to go for it, ask them to confirm that it has the oil sight window on the motor. Oh, and that exhaust probably won't last much longer ... I,ve just had my spare 1125 exhaust recoated but the original at 3 years old and 11K is still in fairly good condition and has been used during the winters as well. Going to swap them at some point and then have the original recoated. |
|
| Author: | Maz [ 24 Apr 2013 12:17 ] |
| Post subject: | Re: 1125CR WANTED |
Hawk13 wrote: I'm amazed by the prices that these (don't) fetch and the attitudes of purchasers. £3600 gets you a lot of bike and much newer than a comparably priced Tuono, Superduke, Speed Triple etc. It's beyond me how people think it isn't worth that! And the seller says it has FSH - so at 12,400 miles I woudl expect the 12k service to have been done Service intervals are 620, 6,200 and 12,400.......so, it's due it's 1st major service now not at 12K 
|
|
| Author: | Adam [ 24 Apr 2013 17:49 ] |
| Post subject: | Re: 1125CR WANTED |
I asked the owner, and the valve check hasn't been done. He told me it wasn't due yet 
|
|
| Author: | Thedieseldoc [ 24 Apr 2013 19:55 ] |
| Post subject: | Re: 1125CR WANTED |
Well according to maz it is and he should know as he's the on you's all go to for advice! |
|
| Author: | sportster_mann [ 24 Apr 2013 21:47 ] |
| Post subject: | Re: 1125CR WANTED |
Oh, believe me, it's due ... ...and I have got two of them to do soon ...  
|
|
| Author: | Adam [ 24 Apr 2013 21:47 ] |
| Post subject: | Re: 1125CR WANTED |
Thedieseldoc wrote: Well according to maz it is and he should know as he's the on you's all go to for advice! I know, (I have a 1125R  ) Maz is absolutely correct. I was pointing out that the seller was talking bollocks
|
|
| Author: | Adam [ 24 Apr 2013 21:49 ] |
| Post subject: | Re: 1125CR WANTED |
sportster_mann wrote: Oh, believe me, it's due ... ...and I have got two of them to do soon ... ..........and fortunately for you, your V Rod shim kit will do both bikes  
|
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|