It is currently 15 May 2025 04:52

All times are UTC+01:00




Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next
Author Message
 Post subject: 1125CR WANTED
PostPosted: 23 Apr 2013 19:35 
Offline

Joined: 08 Aug 2012 17:01
Posts: 31
Current ride: 1125CR XB12XT 1190RX
Location: Uk
Wanted 1125cr anything considered,, Gary


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 23 Apr 2013 19:40 
Offline
User avatar

Joined: 22 May 2009 18:43
Posts: 3308
Current ride: S1`s
Location: Llanelli South Wales
http://www.ebay.co.uk/itm/RED-2010-BUEL ... 257d07c693


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 23 Apr 2013 21:00 
Offline

Joined: 08 Aug 2012 17:01
Posts: 31
Current ride: 1125CR XB12XT 1190RX
Location: Uk
This guy was punting this about on Facebook about a week ago, messaged him and he recons he's been offered 3600 off dealer, good luck I say cos ain't worth that and he's saying its in vgc it looks a bit scruffy to me and its in bloody Devon can you get any further away from Durham


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 23 Apr 2013 21:10 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Cornwall is a bit further ;)

_________________
08 Specialized Langster


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 23 Apr 2013 21:55 
Offline

Joined: 08 Aug 2012 17:01
Posts: 31
Current ride: 1125CR XB12XT 1190RX
Location: Uk
Not bloody much when you've travelled that far, and as maz has just pointed out its due a 1200 quid service, so might give it a bit of a wide berth. :ill:


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 10:16 
Does look to be a genuine 2010 model, so a rare beast though !

If you decide to go for it, ask them to confirm that it has the oil sight window on the motor.

Oh, and that exhaust probably won't last much longer ...


Top
   
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 10:32 
Offline

Joined: 06 Jan 2012 15:48
Posts: 178
Current ride: Yamaha
Location: UK
I'm amazed by the prices that these (don't) fetch and the attitudes of purchasers.

£3600 gets you a lot of bike and much newer than a comparably priced Tuono, Superduke, Speed Triple etc. It's beyond me how people think it isn't worth that!

And the seller says it has FSH - so at 12,400 miles I woudl expect the 12k service to have been done ;)


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 10:37 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
Hawk13 wrote:
I'm amazed by the prices that these (don't) fetch and the attitudes of purchasers.

£3600 gets you a lot of bike and much newer than a comparably priced Tuono, Superduke, Speed Triple etc. It's beyond me how people think it isn't worth that!

And the seller says it has FSH - so at 12,400 miles I woudl expect the 12k service to have been done ;)

:yt:

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 10:40 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
sportster_mann wrote:
Does look to be a genuine 2010 model, so a rare beast though !

If you decide to go for it, ask them to confirm that it has the oil sight window on the motor.

Oh, and that exhaust probably won't last much longer ...


I,ve just had my spare 1125 exhaust recoated but the original at 3 years old and 11K is still in fairly good condition and has been used during the winters as well.
Going to swap them at some point and then have the original recoated.

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 12:17 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8646
Location: Manchester
Hawk13 wrote:
I'm amazed by the prices that these (don't) fetch and the attitudes of purchasers.

£3600 gets you a lot of bike and much newer than a comparably priced Tuono, Superduke, Speed Triple etc. It's beyond me how people think it isn't worth that!

And the seller says it has FSH - so at 12,400 miles I woudl expect the 12k service to have been done ;)


Service intervals are 620, 6,200 and 12,400.......so, it's due it's 1st major service now not at 12K :)

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 17:49 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
I asked the owner, and the valve check hasn't been done. He told me it wasn't due yet :roll: :roll: :roll:

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 19:55 
Offline

Joined: 08 Aug 2012 17:01
Posts: 31
Current ride: 1125CR XB12XT 1190RX
Location: Uk
Well according to maz it is and he should know as he's the on you's all go to for advice!


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 21:47 
Oh, believe me, it's due ...

...and I have got two of them to do soon ... :shock: :(


Top
   
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 21:47 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
Thedieseldoc wrote:
Well according to maz it is and he should know as he's the on you's all go to for advice!



I know, (I have a 1125R :D ) Maz is absolutely correct. I was pointing out that the seller was talking bollocks :roll:

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: 1125CR WANTED
PostPosted: 24 Apr 2013 21:49 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
sportster_mann wrote:
Oh, believe me, it's due ...

...and I have got two of them to do soon ... :shock: :(




..........and fortunately for you, your V Rod shim kit will do both bikes :yup: lOl

_________________
If your dreams don't scare you, they are not big enough.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited