Uly frame pucks will fit the 1125 frame and are available from any good Buell dealer, a lot cheaper than the carbon ones, and probably about as useful too ...
k)05+w~~60_35.JPG)
| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| 1125 Frame Protectors https://www.ukbeg.com/forum/viewtopic.php?f=11&t=16275 |
Page 1 of 1 |
| Author: | Portishead Ulysses [ 28 Jan 2013 06:43 ] |
| Post subject: | 1125 Frame Protectors |
Does anyone have a set of frame protectors for an 1125R that they no longer want and are looking to swap for cash? Whilst I like the German carbon-fibre units, I am still in need of both my kidneys and Mrs PU and the child won't go without food for a month to allow me to buy some. Alternatively, if anyone could point me in the direction of a more cost effective supplier I would be very grateful. Thanks to one and all. |
|
| Author: | sportster_mann [ 28 Jan 2013 14:01 ] |
| Post subject: | Re: 1125 Frame Protectors |
Uly frame pucks will fit the 1125 frame and are available from any good Buell dealer, a lot cheaper than the carbon ones, and probably about as useful too ...
|
|
| Author: | Portishead Ulysses [ 28 Jan 2013 15:36 ] |
| Post subject: | Re: 1125 Frame Protectors |
Thanks for that. I have these on my Uly and had decided to do something different on the 1125. As you say, they are probably just as effective and a lot cheaper. After some more Googling this morning I have found a company in Slovakia who manufacture a set for the XB at £130 so this may be an option too. Still open to suggestions! |
|
| Author: | sportster_mann [ 28 Jan 2013 19:06 ] |
| Post subject: | Re: 1125 Frame Protectors |
XB ones will not fit the 1125 models ... ... assuming you are talking about something like this ... 
|
|
| Author: | mcrbuelligan [ 28 Jan 2013 22:19 ] |
| Post subject: | Re: 1125 Frame Protectors |
http://www.twinmotorcycles.nl/webshop/a ... 1125_right |
|
| Author: | Portishead Ulysses [ 29 Jan 2013 06:50 ] |
| Post subject: | Re: 1125 Frame Protectors |
Thanks for the pointers! |
|
| Author: | pash [ 29 Jan 2013 07:47 ] |
| Post subject: | Re: 1125 Frame Protectors |
Won't the scoops protect the frame? |
|
| Author: | sportster_mann [ 29 Jan 2013 10:09 ] |
| Post subject: | Re: 1125 Frame Protectors |
mcrbuelligan wrote: http://www.twinmotorcycles.nl/webshop/artikel.asp?guid=YXHFSC&aid=1917&cid=315&s=&a=&aname=Buell_1125_Carbon_frame_cover_1125_right That is only for the right side, you will also need the left ... |
|
| Author: | Portishead Ulysses [ 29 Jan 2013 11:48 ] |
| Post subject: | Re: 1125 Frame Protectors |
Indeed they would and there's nothing to protect them. Was just looking for a cost effective way to protect the frame and paintwork for as long as possible. |
|
| Author: | kevmean [ 29 Jan 2013 15:09 ] |
| Post subject: | Re: 1125 Frame Protectors |
pash wrote: Won't the scoops protect the frame? They do a very good job but i have seen pics where the frame has just got slightly scuffed above them hence why the CR also wears a pair of Ully frame pucks  Carbon frame protectors will be mostly hidden behind the pods anyway. |
|
| Author: | coppersaucepipe [ 25 Feb 2013 17:28 ] |
| Post subject: | Re: 1125 Frame Protectors |
pash wrote: Won't the scoops protect the frame? Not from gravel rash at Silverstone
|
|
| Author: | Bonzo [ 25 Feb 2013 17:57 ] |
| Post subject: | Re: 1125 Frame Protectors |
coppersaucepipe wrote: pash wrote: Won't the scoops protect the frame? Not from gravel rash at Silverstone Or Losail 
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|