| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| 2001 x1 gear linkage https://www.ukbeg.com/forum/viewtopic.php?f=11&t=15653 |
Page 1 of 1 |
| Author: | brownie 67 [ 10 Oct 2012 08:14 ] |
| Post subject: | 2001 x1 gear linkage |
Hi has anyone got the linkage for the gear selector between the shaft and the foot pedal (the short linkage bar not the one off the boomerang type thankyou)andrew |
|
| Author: | pash [ 10 Oct 2012 09:12 ] |
| Post subject: | Re: 2001 x1 gear linkage |
There were a number of them on US eBay about 6 months ago. I know the genuine one is a nice die casting, but surely one could fashion one up with a pair of rose joints and a drilled and tapped rod? Rise joints are a couple of quid on eBay... |
|
| Author: | brownie 67 [ 10 Oct 2012 10:02 ] |
| Post subject: | Re: 2001 x1 gear linkage |
Cheers pash I'm having my first look at it today and I think I should be able to make something up as its only the bearing bit which connects to lever broke so ill bodge something and clean off the scratches cheers .. |
|
| Author: | pash [ 10 Oct 2012 10:15 ] |
| Post subject: | Re: 2001 x1 gear linkage |
Is the broken bit this part? http://bit.ly/ROJxef |
|
| Author: | brownie 67 [ 10 Oct 2012 11:37 ] |
| Post subject: | Re: 2001 x1 gear linkage |
No it's the alloy bar with a slight dog leg in it ,I've just been and bought a new banjo bolt as mine was bent bot where the bar bolts to gear lever there's a 15mm hole left where obviously it had a bearing pressed in but I think I will get round it with a washer and a bearing but it won't be a tight fit but it'll get me by cheers |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|