Anyone got the front (larger of the two) bolt for the Nissin rear brake on M2 and others. Tried to remove mine and it has sheared off in the casting

_________________
2017 KTM 690 Duke
2001 M2
2019 Street Triple RS
2004 Monster S4R
Wilier La Triestina

I will have a look in the shed and let you know m8.

_________________
xxxx

I think that's the size too

_________________
"With square conduct, level steps, and upright intentions ..”

No, it's not

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

_________________
"With square conduct, level steps, and upright intentions ..”

Cheers Rich

_________________
2017 KTM 690 Duke
2001 M2
2019 Street Triple RS
2004 Monster S4R
Wilier La Triestina

Just checked Martin, no bolt(s)...I have still got the caliper mount if you need it.

_________________
xxxx

Getting one made by one of the local engineering companies down here so the day is saved

_________________
2017 KTM 690 Duke
2001 M2
2019 Street Triple RS
2004 Monster S4R
Wilier La Triestina

Well, my slider pin broke tonight when changing the pads. The previous owner, not content with painting the engine, swinging arm and anything else he could reach with a brush, decided to omit the rubber boot, which ended up with the pin rusting inside the bracket and shearing off when I tried to remove it...

Luckily I was able to stick it on the milling attachment and use a drill just big enough to break through the wall of the pin...

...then I was able to collapse it an pull it out with a pair of thin nosed pliers...

H0106.F PIN BOLT, CALIPER, REAR

About a fiver from Black Bear...

The rubber boot isn't listed, so I am hoping it comes with the pin, if not I will be visiting Fowlers to see if there is a similar boot listed for a Yamaha/Honda/Suzuki/Kawasaki with a Nissin single piston rear caliper...

_________________
08 Specialized Langster

Cheers for info Nick, had to drill mine out and surprised how light the metal was, probably designed so it shears easily when seized!

_________________
2017 KTM 690 Duke
2001 M2
2019 Street Triple RS
2004 Monster S4R
Wilier La Triestina

And here we have the boot...

http://www.triumphparts.gbr.cc/www.triu ... 9259&ack=9

My pin was quite hard, either that or my centre drill has seen better days...

_________________
08 Specialized Langster

Even better, the boot is listed as an individual part on the XBs...

H0053.T BOOT, CALIPER PIN, FRONT BRAKE

About £2 from Black Bear...

Note to oneself:

Order H0053.T and H0106.F (and 3 x H0055.9 - boot on the master cylinder) on Monday

_________________
08 Specialized Langster

You wont be ordering any parts from BB on Monday because they're not open for business :

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

I've got a boot I don't need, can post tommorow if you want...free of charge.

_________________
xxxx

IIRC, the pins are the same as the VTR. Probolt do them in all kinds of exotic materials, and they keep the screw on covers

_________________
If your dreams don't scare you, they are not big enough.