| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| 1125 tail section parts https://www.ukbeg.com/forum/viewtopic.php?f=11&t=12090 |
Page 1 of 1 |
| Author: | foxy [ 25 Aug 2011 11:09 ] |
| Post subject: | 1125 tail section parts |
i need the rubber grommets that are in the tail section of the 1125r...in the parts book it only shows the t30 shoulderd hex bolts and washers..any help would be great thanks |
|
| Author: | sportster_mann [ 25 Aug 2011 11:23 ] |
| Post subject: | Re: 1125 tail section parts |
If they're not listed then they will probably be generic HD parts - you could try your local dealer ... |
|
| Author: | pash [ 25 Aug 2011 11:31 ] |
| Post subject: | Re: 1125 tail section parts |
Probably same as on a Firebolt. |
|
| Author: | foxy [ 25 Aug 2011 11:52 ] |
| Post subject: | Re: 1125 tail section parts |
thanks for the replys...i will give them a try |
|
| Author: | pash [ 25 Aug 2011 11:54 ] |
| Post subject: | Re: 1125 tail section parts |
I bought some once so they are in the parts book for the FB |
|
| Author: | Maz [ 25 Aug 2011 12:17 ] |
| Post subject: | Re: 1125 tail section parts |
FB uses T27 screws which have a 1/4unc thread......1125 uses a T30 which has an M6 thread. 1125 tail uses rivnuts not well nuts......the only grommets are those sometimes fitted into the plastics and the part number is M0704.02A8 |
|
| Author: | foxy [ 25 Aug 2011 20:44 ] |
| Post subject: | Re: 1125 tail section parts |
thanks maz thats a big help |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|