i need the rubber grommets that are in the tail section of the 1125r...in the parts book it only shows the t30 shoulderd hex bolts and washers..any help would be great

thanks

If they're not listed then they will probably be generic HD parts - you could try your local dealer ...

Probably same as on a Firebolt.

_________________
08 Specialized Langster

thanks for the replys...i will give them a try

I bought some once so they are in the parts book for the FB

_________________
08 Specialized Langster

FB uses T27 screws which have a 1/4unc thread......1125 uses a T30 which has an M6 thread.
1125 tail uses rivnuts not well nuts......the only grommets are those sometimes fitted into the plastics and the part number is M0704.02A8

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

thanks maz thats a big help